Device Search tip
The names of the programmable devices in our database don't contain all characters, shown at the top of the chip or mentioned in a datasheet section part numbering. The names of the chips in our database contain all characters necessary for identification of the device, but don't contain such codes, that have no influence to the programming, for example temperature code, speed code, packing type code, etc. . If such code letter is at the end of the name, it should be omitted (Ex. 1). If such code letter is in the middle of the name, it should be replaced by character 'x' (Ex. 2).
devices Am27C512-150, Am27C512-200 and Am27C512-250 should be searched as Am27C512
device S29GL064N11TF1010 should be searched as S29GL064NxxTxx01
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
The sample of programmable devices is necessary to have for test and release new
In case of missed samples, we always asking the semiconductor manufacturer
for samples, but if samples are not available - also in the package you're
asking for the support - the solution from us will be delayed.
The real chips are also necessary to have in the case of reproducing issues
from the created support. Therefore we can return your samples only if we
get chips from semiconductor manufacturer.
Move the cursor over the box to highlight particular section
24C, 24HC = 2 wire serial EEPROM24CS = 2 wire serial EEPROM with Software Write Protection or with128-bit serial number feature24MAC = 2 wire serial EEPROM with Extended Memory (128-bit SerialNumber, EUI-48/64 Value)24RF = 2 wire serial EEPROM with RFID Interface30TSE = 2 wire serial EEPROM with Temperature Sensor34C = 2 wire serial EEPROM with Software Write Protection
Blank00 = Jedec (JC42.4) SO-DIMM SPD + TS compliant4 = EUI-48 standard6 = EUI-64 standard75 = Pin and Software Compatible to Industry-Standard LM75-Type Devices
C = Commercial temperature rangeI = Industrial temperature rangeH = Green, NiPdAu lead finish, Industrial temperature rangeU = Green, matte Sn lead finish, Industrial temperature rangeP = Green, NiPdAu lead finish, Automotive temperature range
Blank = 4.5V to 5.5V2.7 = 2.7V to 5.5V2.5 = 2.5V to 5.5V1.8 = 1.8V to 5.5V or 1.8V to 3.6VM = 1.7V to 3.6V or 1.7V to 5.5VD = 2.5V to 5.5VL = 1.7V to 5.5V