Home » Device: S25FL208K (ISP) Device: S25FL208K (ISP) Manufacturer: Cypress Part number description for this device: XXXXX XXX X XX X X X XX X Move the cursor over the box to highlight particular section XXXXX Device Family S25FL = Spansion Memory 3.0 Volt-only,Serial Peripheral Interface (SPI) Flash Memory XXX Density 204, 004 = 4Mbit008, 208 = 8Mbit016, 216 = 16Mbit032 = 32Mbit064 = 64Mbit128 = 128Mbit X Density Technology K = 0.09um process technology XX Speed 0X = 104MHz0T = 85MHz0R = 76MHz0P = 65MHz0S = 80MHz X Package Type M = 8-pin SO packageN = 8-contact WSON packageB = 24-ball 6x8 mm BGA package, 1.0 mm pitch X Package Material F = Lead (Pb)-freeH = Low-halogen, Lead (Pb)-free X Temperature Range I = Industrial (–40°C to +85°C)V = Automotive (–40°C to +105°C) XX Model Number (Additional Ordering Options) 04 = 8-pin SO package (150 mil)01 = 8-pin SO package (208 mil)00 = 16-pin SO package (300 mil)02 = 5x5 ball BGA package03 = 4x6 ball BGA packageQ1 = 8-lead SO package (208 mil) / 8-contact WSON(Default quad mode enabled) X Packing Type 0Tray1 = Tube3 = 13\'\' Tape and Reel
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result page Supported by programmers and programming adapters/modules: BeeHive204 adapter/module: Note: via ISP connector BeeHive204AP adapter/module: Note: via ISP connector BeeHive208S adapter/module: Note: via ISP connector BeeProg2 adapter/module: Note: via ISP connector BeeProg2AP adapter/module: Note: via ISP connector BeeProg2C adapter/module: Note: via ISP connector SmartProg2 adapter/module: Note: via ISP connector BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page