Device: PH28LF040
Manufacturer: SST
Part number description for this device:
Move the cursor over the box to highlight particular sectionSST | ||
XX | Family Descriptor | 28 = SuperFlash EEPROM |
xF | Power Supply | S = 4.5V to 5.5VL = 3.0V to 3.6VV = 2.7V to 3.6V |
XXX | Device Density | 010, 010A = 128kx8020, 020A = 256kx8040, 040A = 512kx8200 = 128kx16400 = 256kx16512, 512A = 64kx8800 = 512kx16 |
XXX | Read Access Speed | 70 = 70 ns90 = 90 ns120 = 120 ns200 = 200 ns |
X | Minimum Endurance | 4 = 10000 cycles3 = 1000 cycles5 = 100000 cycles6 = 1000000 cycles |
X | Temperature Range | C = CommercialI = IndustrialA = AutomotiveM = Military |
X | Package Type | N = PLCCW = TSOPP = Plastic DIPU = Unencapsulated dieB = TFBGAS = PSOPQ = WSONE = TSOP(die up) 8x20, or 10x20K = TSOP 8x13.4W = TSOP(die up) 8x14, or 10x14 |
X | Package Modifier | H = 32 leadsNumeric = Die modifierA = 8 leads or contactsG = 28 leadsI = 40 leadsK = 48 leadsJ = 44 leads |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
BeeHive204 | |
BeeHive208S | |
BeeProg2 | |
BeeProg2C | |
SmartProg2 | |
MEMprog2 (discontinued) |