Additional modules

PLD-1
 PLD-1
2708
 2708
z51
 z51

Module z51

z51
  • assigned for 40-pin microcontrollers MCS51 family (87C51, C52, C54, C58, C51FA, C51FB, C51FC, AT89C51, 52, 55, 87C528, 652, 654, 87C51RD, 89C5xU, 89C51Rx etc.)
  • accessories for PREPROM-02 and PREPROM-02aLV
  • operation life of ZIF socket - 25.000 actuations
Order no.:70-0058
Socket:ZIF DIL40, for 300mil and 600mil devices
Bottom:2 rows, 2x 16 pins, square, 0.6x0.6mm, rows spacing 600mil
Availability in stock: -
Module manual
  • Insert module to the programmer ZIF socket according to the picture placed near of it. Open the module ZIF socket by lever (lever is at upper position). Insert the device into it according to the picture placed near of it and close module ZIF socket by lever (lever is at lower position).
  • Visually check interconnection between device and module ZIF socket. If everything looks OK, the device is ready for programming.
  • Be careful, because the incorrect insertion of module to the programmer ZIF socket or device to the module ZIF socket can damage the programmed device.
  • To take out the device open the module ZIF socket by lever (lever is at upper position) and remove device from it.
  • When you finish work with module, remove it from the programmer ZIF socket.
  • Do not directly touch the pins of the module and module ZIF socket, because dirt may cause errors during programming of device.
Acceppted package(s)
DIP40 DIP40
DIP40
Back to TOP