JetProg - multiprogramming system

Features

General

• The Common multiprogramming module no.1 with PICmicro socket submodules present - attached to JetProg programmer - high throughput manual operated Microchip PICmicro microcontrollers multiprogramming solution, suitable for medium volume production application.
• This Microchip PICmicro series microcontrollers multiprogramming system provides very competitive price but excellent hardware design for reliable programming.

Hardware

• The Microchip PICmicro series microcontrollers multiprogramming system supports Microchip PICmicro microcontrollers, based on both EPROM and Flash technology.
• The replaceable socket submodules package enable different package type support.
• Optimized advanced pindriver deliver programming performance without overshoot or ground bounce for all memory technologies. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.
• The Microchip PICmicro series microcontrollers multiprogramming system performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.

Software

• The Microchip PICmicro series microcontrollers multiprogramming is driven by an easy-to-use WIN-95/98/2000/XP compatible control program with pull-down menu, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.
• Standard device-related commands (read, blank check, program, verify, erase) are boosted by some test functions (insertion test, signature-byte check).
• All known data formats are supported. Automatic file format detection and conversion during load of file.

Hardware

Multiprogramming modules

Common multiprogramming module no.1

• advanced specialized pindriver (8x), compatible for multiprogramming of more chip types (EPROM/EEPROM, MCS51, PICmicro, ...)
• pindrivers are independent, therefore defective chip haven't influence to another programmed chips
• perfect ground and necessary supply/programming voltage can be applied independently to each socket of submodule
• current limitation for each socket, overcurrent shutdown, power failure shutdown
• banana hole for ESD wrist straps
• insertion test
• ord. no.: 70-0151 (discontinued)

Programming sockets - submodules

PIC-DIL40-2-1 socket submodule

• fits for PICmicro controllers PIC12xxx, PIC16xxx and PIC18xxx up to DIL40 package
• 2x ZIF DIL40 sockets
• operation life of ZIF sockets - 25.000 actuations
• ord. no.: 70-0149 (discontinued)

Software

• Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost.
  
  
• Algorithm updates: software updates are available approx. every 2 weeks, free of charge.
  
  
• Main features: revision history, session logging, on-line help, device and algorithm information.
  
  

Device operations

• standard:
  • intelligent device selection by device type, manufacturer or typed fragment of part name
  • blank check, read, verify
  • program
  • erase
  • checksum
• security:
  • insertion test, reverse insertion check
  • ID byte check
• special:
  • auto device serial number increment (serialization)
  • statistic
  • count-down mode

Buffer operations

• view/edit, find/replace
• fill/copy, move, byte swap, word/dword split
• checksum (byte, word)
• print

File load/save

• no download time because programmer is PC controlled
• automatic file type identification
  Supported file formats
  • unformatted (raw) binary
  • HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX

Device support

• EPROM based Microchip PICmicro chips: PIC12Cxxx/PIC16Cxxx/PIC18Cxxx series
• Flash based Microchip PICmicro chips: PIC12Fxxx/PIC16Fxxx/PIC18Fxxx series
  
• Check please the list of all supported devices for details..

Programming speed

Notes.

• given values are meassured under all 8 devices together condition
• this times strongly depend on PC speed, LPT port type and operating system free resources. Therefore values of two different PC configuration are given for comparison.

Device	Operation	Time A	Time B
PIC16C67	programming and verify	18 sec.	15 sec.
PIC16F877A	programming and verify	11 sec.	8 sec.
PIC18F452	programming and verify	17 sec.	14 sec.
Time A conditions: Pentium MMX, 250 MHz, ECP/EPP, WIN98. Time B conditions: Athlon, 750 MHz, ECP/EPP on PCI bus, WIN98.

General

PC system requirements

• Common, software related requirements
• Programmer hardware related requirements:
  • one (parallel) printer port with nothing attached, the IEEE 1284 compatible printer port (ECP/EPP) on PCI bus recommended

Operation

• power supply: from JetProg programmer (use adapter included with module)
• dimensions 275x135x20 mm (10.8"x5.3"x0.78") without submodules, 275x135x33 mm (10.8"x5.3"x1.29") with PIC- DIL40-2-1 submodules attached. The connectors haven't influence to programmer&module height.
• weight (without external adapter) 750g
• temperature 5°..40°C
• humidity 20%..80%, non condensing

Base configuration package includes

• Common multiprogramming module no.1
• Family and ZIF socket submodules - according to order (4x)
• switching power supply adapter 100-240VAC/15VDC/1A
• user manual (on CD)
• registration card
• software
• transport case

Additional services

• Keep Current - Elnec sends to user the latest version of programmer software and updated user documentation (Keep-Current package)
• AlgOR (Algorithms On Request) - add new supported devices at the customer's request

Programmer price also includes

• free technical support (WebForm/e-mail based)
• free life-time software update via Internet