BeeProg2

 
For the proper functioning of this website we recommend to turn on JavaScript.
 

PREPROM-02aLV



Discontinued product. Replacement: SmartProg2.


Programmer of EPROM, (E)EPROM, Flash EPROM, microprocessors, ...

PREPROM-02aLV Short description:
  • programming the EPROM, EEPROM, FLASH EPROM, NVRAM and serial EEPROM
  • if equipped with additional modules, it's also capable to program the EPROMs 2708, 48 and 51 series microcomputers, EPROMs (x16 bit), GALs, mP PICmicro, Atmel, Dallas
  • high programming speed
  • connection to PC - parallel (printer) port
  • comfortable and easy to use control program, Windows 95/98/Me/NT/2000/XP compatible
  • free SW update, download from Internet
  • small dimensions
  • power supply, cable and SW included
  • warranty - 3 years
  • approved by CE laboratory to meet CE requirements
    CE sign

Available accessories:

Features

PREPROM-02aLV is a small and powerful EPROM, EEPROM, Flash EPROM and serial EEPROM programmer and static RAM tester, designed for professional mobile applications. In addition, PREPROM-02aLV programmer with auxiliary modules support also microprocessors (MCS48, MCS51, PIC, AVR), GALs, etc. Generators for supply voltage and programming voltage are digitally controlled and level of H can be limited, therefore programmer can work with 'true LV' device too - from 2V. Performance, dimensions and speed of PREPROM-02aLV can be used both in maintenance and in production. Following high reliability of Elnec's programmers, 3 years warranty is provided for PREPROM-02aLV.

PREPROM-02aLV interfaces with the IBM PC 486 compatible or higher, portable or desktop personal computers. Programmers allows you to directly connect to your PC through any standard parallel (printer) port - no special interface card is needed.

Built-in protection circuits eliminate damage of programmed device due to mains supply error, communication error or if PC is frozen. Programmer's hardware afford enough resources for self-test (using diagnostic POD), that control program is any time be able to check pindrivers, presence and level of all voltages, check the timing and communication between programmer and PC.

A programming verification is performed by the programmer at the marginal level of VCCP, which, obviously, improves programming yield, and guarantees long data retention.

The advantage of PREPROM-02aLV is its easy-to-use comfortable software with pull-down menu, hot keys and on-line help. You can select device by classes, by manufacturers or simply type device vendor's name and part number. The standard device operation functions (read, blank check, program, verify) have been completed with some test functions (illegal bit test, insertion test). The program facilitates the use of the buffer and files, including automatic file format detection and conversion.

The software also provide a many information about programmed device. As a special, the drawing of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip.

The Autoincrement function of PREPROM-02aLV enables one to assign individual serial numbers to each programmed device. This function simply increments a serial number in the buffer each time a new device is inserted. Furthermore, the function enables an operator to read serial numbers and/or any programmed device identification from a file.

Free software updates are available by download

News in the customer support are Keep-Current and AlgOR services.

  • Keep-Current service means, that Elnec ships the latest version of programmer software and and updated user documentation (Keep-Current package) to customer . A Keep-Current service is your hassle-free guarantee that you are doing the highest quality programming on Elnec programmers, at minimal cost.

  • AlgOR (Algorithm On Request) service give to the user tool, with which can influence on amount and types programmed devices as need.

The PREPROM-02aLV can make for use of DIL to PLCC, SOIC and TSOP socket converters.

Taking into consideration the PREPROM-02aLV programmer design, protective circuits, and the components used, the manufacturer is able to provide a three-year warranty on parts and labor for the programmer (limited 25,000-cycle warranty on the ZIF socket).

Specification

Socket, pin driver, DAC

  • 32-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 32-pin
  • two D/A converters for VCCP and VPP, with controllable rise/fall time and current limitation
  • TTL driver provides H, L and read for all 32 pins
  • full support of Low Voltage circuits from 2.0 V

Device support

Programmer

  • EPROM: NMOS/CMOS, 2708*, 27xxx and 27Cxxx with 8/16* bit data width
  • EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx with 8/16* bit data width
  • Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 32Mbit, with 8/16* bit data width
  • Serial E(E)PROM: AT17Cxxx, 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx, MDAxxx* series
  • NV RAM: Dallas DSxxx, SGS/Inmos MKxxx series
  • PLD*: AMD PALCE, GALs, PEELs series
  • microcontrollers 48 series*: 87x41, 87x42, 87x48, 87x49, 87x50 series
  • microcontrollers 51 series*: 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, Philips 87C748..752 series
  • microcontrollers Microchip PICmicro*: PIC12Cxxx, PIC16C5x, PIC16Cxxx, PIC18Cxxx series
  • microcontrollers Atmel AVR*: AT90Sxxxx, ATtiny series
  • microcontrollers NEC*: uPD78Pxxx series
Notes:
  • devices marked * are programmed with additional module
  • the PREPROM-02aLV programmer is NOT INTEDED to be a ISP programmer. If you think about ISP, use please the programmers, equipped by ISP connector (SmartProg, BeeProg, ...)

I.C. Tester

  • static RAM: 6116 .. 624000

Programming speed

Note: The programming times of the programmer, attached to PC through LPT port, depends a bit on PC speed, LPT port type and operating system free resources. Look at Elnec programmers, tips to increase of programming speed application note for details.

  • NMC27C256, programming and verifying : 24 sec
  • AM27C010, programming and verifying : 37 sec
Conditions: P4, 2.4 GHz, ECP, Windows XP.

Device operations

  • standard:
    • automatic ID-based selection of EPROM/Flash EPROM
    • blank check
    • read
    • program
    • verify
    • erase
    • configuration and security bit program
  • security:
    • ID byte check
  • special:
    • auto device serial number increment

Buffer operations

  • view/edit, find/replace
  • fill/copy, move, byte swap, word/dword split
  • checksum (byte, word)
  • print

Supported file formats

  • unformatted (raw) binary
  • HEX: Intel, Intel EXT, Motorola S, MOS, Exormax, Tektronix, ASCII-SPACE-HEX
  • JEDEC (ver. 3.0.A), eg. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer ISDATA, etc.

PC system requirements

General

  • operating voltage 12..15V DC, max. 0.5A
  • power consumption 6W max.
  • dimensions 160x110x50 mm (6.3x4.3x2 inch)
  • weight (without external adapter) ca. 650g (22.945 oz)
  • temperature 5°C ÷ 40°C (41°F ÷ 104°F)
  • humidity 20%..80%, non condensing

Package includes

PREPROM-02aLV package
  • PREPROM-02aLV programmer
  • wall plug adapter, 12V DC/500mA, unstabilized
  • connection cable PC-programmer
  • diagnostic POD for selftest of the programmer
  • anti-dust cover for ZIF socket
  • software
  • user manual (on CD)
  • registration card
  • transport packing

Additional services

  • Keep-Current - Elnec sends to user the latest version of programmer software and updated user documentation (Keep-Current package).
  • AlgOR (Algorithms On Request) - new supported devices on customer request

Programmer price also includes

  • free technical support (hot line)
  • free life-time software update via Internet

The information in this document is subject to change without notice.