UBICOM devices supported by Elnec device programmers

Program Pg4uw ver.2.89/05.2012           
Device
SX18AC old rev
SX18AC old rev [SOIC18]
SX18AC rev A
SX18AC rev A [SOIC18]
SX20AC old r. [SSOP20]
SX20AC rev A (ISP)
SX20AC rev A [SSOP20]
SX28AC old r. [SSOP28]
SX28AC old rev
SX28AC old rev [SOIC28]
SX28AC rev A
SX28AC rev A (ISP)
SX28AC rev A [SOIC28]
SX28AC rev A [SSOP28]
SX48BD rev A (ISP)
SX48BD rev A [TQFP48]
SX52BD rev A (ISP)
SX52BD rev A [PQFP52]
BeeHive208SBeeHive204BeeHive204APBeeHive204AP-AUBeeHive4+BeeProg2BeeProg2APBeeProg+BeeHive8SBeeHive4BeeProgJetProgLabProg+SmartProgSmartProg2MEMprogMEMprog2MEMprogLPREPROM-02aLVT51progT51prog251&AVRprogPIKprog+PIKprog2PIKprogSEEprog
x x - - x x - x x x x x x x x - - - - - - - x x - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x x - - x x - x x x x x x x x - - - - - - - x x - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x** x** x** x** x** x** x** x** x** - x** - - - - - - - - - - - - - - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x x - - x x - x x x x x x x x - - - - - - - x x - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x x - - x x - x x x x x x x x - - - - - - - x x - -
x** x** x** x** x** x** x** x** x** - x** - - - - - - - - - - - - - - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -
x** x** x** x** x** x** x** x** x** - x** - - - - - - - - - - - - - - -
x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - - - - - - -
x** x** x** x** x** x** x** x** x** - x** - - - - - - - - - - - - - - -
x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* - - - - - - - x* x* - -

Legend:
xthe device is supported by the programmer, directly in ZIF socket of the programmer
x*the device is supported by the programmer, additional module or programming adapter must be used
x**the device is supported by the programmer, via ISP connector of the programmer
-the device is not supported by the programmer

Note: You can select one or more rows by double clik on specific row in table.

Back