Significant modifications of PG4UW/PG4UWMC control program.
         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PG4UW SW, version 2.51, issued 14/AUG/2008

- fixed Load Hex file function for Custom-generator/From-file serialization,
  to stop operation immediately on any error detected in Hex file     
- Pg4uwMC - checksum values are now written to Log window of Pg4uwMC
  for each program/verify device operation and for each programmer Site
- fixed in Pg4uwMC - Multi-Project errors that could occur during loading
  of Multi-Project in multiprogramming mode were fixed
- fixed problem with redundant checksum calculation for Multi-Project
  and multiprogramming mode before each device operation was started.
  Redundant checksum calculation was extremely time consuming,
  especially for large devices (more then 8MB of device memory).
- buffer checksum is not written to Log window when project protected by checksum
  is loaded. To allow device programming user must enter correct checksum of project
  data, specified in time of project creation (saving).
- added buffer checksum recalculation as part of Job Report. This ensures
  the checksum of buffer data to be refreshed after devices were programmed.
  It allows to find out buffer data modifications, that could occur during
  programming of devices.
- added option to display new type of checksums in main window of control program.
  The new checksums are 16-bit CRC-CCITT and CRC-XModem.
- added buffer data checksum check after each loading of project file.
  if the checksums do not match, operation Load project reports error.
  Data checksum check is applied for new project files only. It means project files
  created by this or later version of control program.
- fixed setting of position of control program main window during startup
  of control program to meet the position from previous program session
  when control program was closed and displayed on secondary monitor
- fixed installation problem on BeeHive8S programmer. Update of software could
  not be performed, because dialog did not display installation packages (*.exe).
  If there is already problem with updating of software directly from built-in LCD
  touch screen panel, external monitor, keyboard and (optionally) mouse will be needed
  to run standalone programmer as "classic" computer and to run installation of new
  software manually from Windows Explorer.
- changed displaying of "radio button" items in "Information before programming"
  or "Program?" window. New symbol is (o) for checked and ( ) for unchecked item.
- added new information - Original file - about project to Project description.
  Original file is data file loaded to buffer before creating of new project file.

################################################################################

PG4UW SW, version 2.50, issued 12/JUN/2008

- support of (automatic) negative and positive offset for Intel and Motorola HEX formats improved  
- fixed bug in Calibration Test function, which caused abortion of this function in some conditions
- fixed Serialization Error #3 that sometimes appears without cause
- fixed unwanted truncation of project file extension in dialogs Load project
  and Save project... the truncation of file extension caused sometimes error
  "File not found"
- main program window position setting during program startup is now checked
  for visibility on any active monitor. If program window is outside screen,
  it will be moved to top-left position of primary screen.
- project files have new - compressed - file format
- added new feature of program - Multi-project support
- added new optional dialog for displaying project file history
  and project selection at program startup

################################################################################

PG4UW SW, version 2.49, issued 15/MAY/2008

- modified menu Load/Manage projects in standalone LCD screen to prevent running
  Load/Manage project operation when any programmer Site is busy or waiting
  for repeat of device operation. Blocked Load project and Manage project
  operation will not be performed, just information message will be displayed.
- fixed bug in "Load project" operation for standalone programmer BeeHive8S.
  There was error that caused load of new project was not performed
  when programmer was in Automatic YES! waiting state. The name of device
  from new project was displayed on LCD screen despite new project was not loaded.
- fixed causeless error:
    Warning: Can not save recent position of serialization to project associated serialization file...
  The error occurred after Save project operation and subsequent Device program operation.
- fixed error "File loading error" that could occur during loading of file if there was
  previously user-cancelled some buffer data operation. Buffer data operation is for example
  Erase buffer, Fill block, Fill random data and so on.
- default directory for Load / Save project operations on standalone programmer
  is set to E:\Projects\ directory (not Pg4uw.exe directory).
- added option to display dialog "Load recent project" at program Pg4uw start up,
  the dialog is usefull for quick loading of recently used project file.
- menu item Programmer | Calibration test has now defined shortcut key "Shift+Ctrl+C",
  and for Dataman ODM is the menu item hidden but remained active (accessible by keyboard
  shortcut)

################################################################################

PG4UW SW, version 2.48, issued 04/APR/2008

- checksum values of Byte and Word type checksums in dialog Checksum
  are widened from 16 to 32 bits. Also added Little/Big endian setting
  for Word and Word (CY) checksums.
- Verify errors file improvements - errors from all verify actions can be cumulate to the same
  file. Number of verify errors can be set by user
- fixed in Pg4uwMC - project load operation during connecting of programmer Site-s
  is now OK also for projects with file names containing Asian characters
- information about device name and manufacturer displayed in Info window
  during load project operation is now correct for currently loading project
- added indication and user setting option of main checksum mode displayed
  in main window of Pg4uwMC
- added information about activation and deactivation of "Project checksum protection mode",
  the information is written to Log file
- added option of generating sounds from build-in beeper on BeeHive8S programmer
- added sound option in PG4UWMC, that allows to select, when sounds have to be
  played (for example after successfully operation not but in case of error yes)


################################################################################

PG4UW SW, version 2.47, issued 28/FEB/2008

- Improved Calibration test so, that it could possible to modify erroneously entered value.
- Motorola HEX format, bug fixed by attempt to download with positive offset
- increased nibbles number for negative offset value setting in "Load file" dialog window
- in Pg4uwMC is added detailed information about Pg4uw running state during starting
  of Pg4uwMC and about Pg4uw <-> Pg4uwMC TCP communication blocking by firewall
- Pg4uwMC - added test for running instances of Pg4uw before each manual
  "Search for Programmer" operation to prevent problems with correct detecting
  of connected programmers
- fixed occurrence of Serialization error #3 when no error
  should be raised because serialization status is OK.
  This error was sometimes raised for From-file serialization
  although there was no reason for error.
  Of course, there are still situations that raise serialization
  error #3, but these situations are real errors.
- statistics information is now correctly written to Log window of Pg4uwMC
  after each device operation completed
- fixed "Range check error" bug when using "Search buffer" function in dialog View/Edit buffer
  for large buffers (more than 2GB large)
- in dialog Checksum is added calculation of new hashsum - SHA1.
  Information about SHA1 and MD5 hashsum values is written to Log window
  after calculation of sums is complete.

################################################################################

PG4UW SW, version 2.46, issued 24/JAN/2008

- "Privileged instruction" bug at 64bit Operation Systems for SEEprog and PREPROM-02aLV fixed
- LPT port scanning improved
- STR7 family, load and save procedures for Motorola HEX format improvement
- updated library file remotelb.dll
- updated utility pg4uwcmd.exe to version 1.06
- added two new word-calculation modes of main checksum displayed in main program
  window: Word sum Little Endian (x16) and Word sum Big Endian (x16)
- in Job Report was fixed incorrect calculation of minutes in "Elapsed time" information
- new information added in Job Report - productivity information
- fixed example utility 'getnextsn.exe' to prevent non-standard library
  CC3260MT.dll requirement. Utility 'getnextsn.exe' is used as example program
  for generating of serial numbers used in Custom-generator serialization.
- fixed bug in Pg4uwMC, operation Load project for large NAND FLASH devices (memory more than 1GB)
- custom generator serialization mode and multiprogramming, serialization error
  code #26 bug fixed
- cursor type "hour glass" is now displayed during complete starting sequence
  of program Pg4uw, until program is ready to execute user commands (by menu or buttons)
- fixed "Range check error" when trying to calculate checksum for large devices
  (more then 2GB). Error occurred also when loading large projects in Pg4uwMC.
- added more detailed error messages, which can occurs for Log file creating
  or writing operations
- added new remote control functions for remote reading/writing of data blocks
  from/to Pg4uw buffers:
    SEND_CMD_RBUFFER_EX_CINDEX
    SEND_CMD_RBUFFER_CINDEX
    SEND_CMD_WBUFFER_EX_CINDEX
    SEND_CMD_WBUFFER_CINDEX

################################################################################

PG4UW SW, version 2.45, issued 14/DEC/2007

- load file in Motorola S format "improved" - bad CRC of S5 record ignored
- temp directory location for BeeHive8S (2.44SW) bug fixed
- function "Reload file if modified" activated during switching from another
  application to Pg4uw application is blocked in case, if program P4uw is in
  any menu (executing some menu command). The reload function is executed later,
  when menu operation is finished (for example a dialog displayed in Pg4uw is closed)
- fixed: when serialization error of custom generator occurs,  behaviour of serialization
  system improved to prevent possibility of duplicitous serial number(s)
- fixed behaviour of Pg4uw.exe and Pg4uwcmd.exe when /program:noanyquest command line
  parameter is used, to prevent displaying of ISP connect/disconnect messages
  for ISP programmed devices
- Negative offset option is moved from General options dialog
  directly to Load file dialog
- in dialog Load file can be now set one of following options:
  None offset, Positive offset, Negative offset and Automatic negative offset
- changed default setting of Log file creation mode to "Append mode".
  Default setting is used when first installing and starting Pg4uw
  or Pg4uwMC program.
- internal: changed name of Pg4uw.ini file to Pg4uw_v2.ini

################################################################################

PG4UW SW, version 2.44, issued 15/NOV/2007

- IntelHEX file format loading improvements
- Automatic negative offset calculation for HEX files load bug fixed
- fixed bug in Simplified Chinese GUI language files
- serialization system improved
- added detailed Log window information about processing of Custom-generator serialization
  in application Pg4uwMC
- fixed duplicity information about buffer checksum written to Log window
  during "Device program" operation and Custom-generator serialization active
- speed up operation "Load project"
- added new demo application for multiprogramming remote control:
  demo is MultiDemo.VB.NET written for MS Visual Studio .NET (Visual Basic .NET)

################################################################################

PG4UW SW, version 2.43, issued 11/OCT/2007

- Pg4uwMC - it is now possible to Show/Hide hidden control programs Pg4uw
  for programmer Sites also during pruning device operation on Sites
- Pg4uwMC - in Job Report is added statistics information for each programmer Site
- Pg4uwMC - fixed problem with freezing of Standalone programmer (blank LCD panel)
  caused by dialog "Out-of-date software version"
- fixed error "Access violation" when trying to display dialog Device info,
  for ISP device and Pg4uw is running from another directory then parent directory
- remote control system improvements

################################################################################

PG4UW SW, version 2.42, issued 13/SEP/2007

- fixed incorrect initial setting of checkbox "Save device Verify errors to file"
  when checkbox is displayed in dialog "General options"

################################################################################

PG4UW SW, version 2.41, issued 31/AUG/2007

- load files from history list bug fixed (files was loaded using binary format)
- BeeProg+ programming speed of memories visible increased
- PG4UW run in WIN98 environment "Can't create report file" bug fixed
- BeeHive8S software/firmware improvements
- language file support improvement, to stop support of obsolete language files
  (languages that were not updated for more than 6 month are removed from support)
- auto-erase of main buffer before selecting of new device function is available
  to set on/off in dialog "General options" (menu "Options | General options" on page "Buffer")
- load files from history list bug fixed (files was loaded using binary format)

################################################################################

PG4UW SW, version 2.40, issued 26/JUL/2007

- additional security against misuse of project file added: checksum of data might
  be requested before programming
- load files in Motorola HEX format improved
- first public version of BeeHive8s software
- improved communication stability of BeeProg+ and BeeHive4+
- SmartProg2, T51prog2, PIKprog2 and MEMprog2 programmers, selftest/selftest plus
  (sRAM test) improved

################################################################################

PG4UW SW, version 2.39, issued 14/JUN/2007

- Modified firmware for BeeProg+, BeeHive4+ based programmers to improve communication
  flow via USB (modification was made by USB microcontroller manufacturer recommendation).
- "Automatic YES!" systems improvements

################################################################################

PG4UW SW, version 2.38, issued 10/MAY/2007
- load file by ASCII HEX format bug fixed
- modified displaying results in calibration test for multiprogrammers
- chip programming statistics improved
- old projects compatibility with new software improved
- multiprogramming system improvements
- remote control (.NET platform) improved
- Pg4uwMC, show device setting in LOG window improved

################################################################################

PG4UW SW, version 2.37, issued 12/APR/2007
- BeeHive4+ multiprogrammer, improved device access status indication (using
  programmer's LEDs) for Auto YES! mode
- BeeProg+/BeeHive4+ programmers firmware improvements
- Pg4uwMC/PG4UW sound setting improvements
- Pg4uwMC, "Refind Programmer Site" procedure "Access violation" bug fixed
- Job Report improvements
- Serialization, From-file type, playlist more improvements

################################################################################

PG4UW SW, version 2.36, issued 08/MAR/2007
- load and save procedures for Intel HEX format improvement for Cypress MCU devices
  by Cypress company requirements
- more improvements of PG4UWMC (multiprogramming control) software
- more improvements of remote control system, including new manual
- PG4UW and PG4UWMC, added JobReport  function. Useful for production programming.

################################################################################

PG4UW SW, version 2.35, issued 08/FEB/2007
- Motorola format saving bug fixed
- modified Find Programmer window in according to discontinuance production of some programmers
- current Log file mode and Log file name are written to Log window anytime
  the Log file mode or name are modified and also when starting Pg4uw
- fixed Buffer Exception Errors, if such error is raised during device operation,
  the Pg4uw indicates clearly this error
- fixed error during Problem report creation - "Wait please..." message was
  replaced by Info window with progress indicator
- in dialog "Serialization" was blocked displaying of "Memory region to use serialization"
  setting for JetProg multiprogramming system, which does not support this option
- for JetProg multiprogramming is added serialization test while Loading project file.
  The test checks the serialization does not have extended memory region set,
  because this option is not supported for JetProg multiprogramming system.
  If the project contains the extended memory serialization, Pg4uw will display
  error message and refuse loading of the project file
- fixed - Pg4uwMC multiprogramming system receives actual serial numbers
  from Programming Sites for indication of serialization in Pg4uwMC main window
- fixed PICmicro checksum displaying in main window of Pg4uw, because sometimes
  PICmicro checksum displayed covers the standard checksum label in main window
  of Pg4uw
- fixed displaying of hexadecimal numbers of "Device options" (Alt+O) and
  "Special options" (Alt+S) dialogs in Log window, when hexadecimal number
  has value 80000000h, the value written to Log window was FFFFFFFFh
- lightly changed header of Buffer dump file generated by "Print buffer" command
  in dialog Buffer / View/Edit buffer
- for message sounds generated by standard PC speaker (if the option is set in
  "General options" dialog) is used standard Windows API delay function Sleep
  which is more reliable then previous mode of generating delays
- changed order of two command line parameters sequence execution:
    before  1. save project
            2. write buffer
    after   1. write buffer
            2. save project
- fixed serious bug in Pg4uwMC, which sometimes caused "Internal errors"
  when running device operations
- new in Pg4uwMC - "Job Report" generation when reloading Project file
  or closing the program or manually by user
- new in Pg4uwMC - new Count down function allows operator to set number of devices
  to program

################################################################################

PG4UW SW, version 2.34, issued 12/JAN/2007
- Project handling feature for STR7xx microcontrollers family added
- improved Find Programmer function

################################################################################

PG4UW SW, version 2.33, issued 15/DEC/2006
- Find Programmer menu, Demo mode button always available
- user break of procedures Buffer Alloc, Fill, Fill random, Copy, Swap etc.
- available button "Create problem report" in case of chip manipulation error(s)
- BeeHive4, improved search programmer in WIN-Vista OS

################################################################################

PG4UW SW, version 2.32, issued 24/NOV/2006
- PG4UW, new type of serialization added: Custom generator mode. User can write own software
  to create serialization data on-line during programming flow.
- PG4UW, swap bytes for double word (32bits) chip organization added
- PG4UW, Device/Select, list of chips can be saved into a file
- PG4UW, /SavePrj command line parameter added.
- PG4UW, command line parameters management in Demo mode bug fixed
- PG4UW/PG4UWMC, write LOG to file improved
- PG4UWMC general improvements
- PG4UWMC, "Access violation ..." bug fixed - error appears for big memory, if buffer
  organization changes from x8 to x16 mode.
- SmartProg2 programmers, improved firmware

################################################################################

PG4UW SW, version 2.31, issued 19/OCT/2006

- Beeprog/BeeHive4 core improvements
- Remote Control System, Examples also available in Microsoft Visual Basic 6
- PG4UWMC/PG4UWCMD, command line system improved
- Philips Dump File (*.DMP) file format added
- multiprogramming serialization on slow PC improved
- PG4UW, PG4UWMC, Log file max. size increased to 200MB
- PG4UW, command line parameter /eprom_flash_autoselect function bug fixed
- improved communication for High Speed USB interface for BeeProg/BeeHive4

################################################################################

PG4UW SW, version 2.30, issued 21/SEP/2006

- Pg4uwMC (multiprogramming system control), statistics counters bug fixed
- PG4UWMC statistics system improved
- PG4UWMC protected mode improved
- PG4UWMC prj file as command line improved
- PG4UWMC prj file association improved
- BeeProg/BeeHive4, improved determining of the communication error location
- BeeProg/BeeHive4, improved USB interface
- BGA adapters identification improved

################################################################################

PG4UW SW, version 2.28, issued 31/AUG/2006
- BeeProg/BeeHive4, versions with High-speed chips at condition of full-speed USB at PC
  random bug fixed
- BeeProg/BeeHive4, issued ability to perform "at home" test of calibration using
  "48 Pins Calibration test POD, Type I" (ord.no. 70-0438)
- Windows Vista Beta2, fixed some small problems with Pg4uw and Pg4uwMC run
- PG4UWMC, improved handling with menu items for programming sites
- PG4UWMC at WIN2000 behavior improved
- PG4UWMC, create problem report procedure improved, Shadow LOG file content added
- PG4UWMC, protected mode added
- PG4UW, Device info window, Print procedure, bug if BGA packages are shown fixed
- PG4UW, remote control, SEND_CMD_GetDev_Checksum command allowed
- PG4UW, checksum refresh after reload of project file added
- PG4UW, bug fixed in load file dialog window for POF file formats
- PG4UW, special hex file loading for all Renesas QzROM family
- Remote control, part examples, directory  ..\remotectrl\programs\Pg4uwcmd.VC, improved

################################################################################

PG4UW SW, version 2.28, issued 29/JUN/2006
- fixed some compatibility bugs regarding Windows Vista beta2.
  PG4UW with BeeProg, BeeHive4 and SmartProg2 is now able to run under WIN Vista
- Split function implemented also for chips with x16 organization
- indication of Serialization improved
- remote control system improved

################################################################################

PG4UW SW, version 2.27, issued 08/JUN/2006
- "Shadow LOG" in english language feature added. It mean the software LOGs all
  activity not in the selected language, but always in English. Feature is intent
  for better location of the problems for the non-English speaking user.
- IntelHEX file save, 16 byte in line increased to 32 bytes
- handling of PRJ files improved (loading speed increased)
- PG4UWMC (multiprogramming control) improved
- added new type of From-file serialization (From-file playlist serialization, useable
  for each-chip-different-content serialization

################################################################################

PG4UW SW, version 2.26, issued 11/MAY/2006
- BeeProg multiprogramming and BeeHive4 multiprogrammer stability increased
- information about Device info setting and Special setting  into LOG window added
- "Automatic YES!" system improved
- PG4UWarc (installation software) improved
- BeeProg/BeeHive4, EC: E5 reason fixed

################################################################################

PG4UW SW, version 2.25, issued 21/APR/2006
- Automatic YES! system improved

################################################################################

PG4UW SW, version 2.24a, issued 30/MAR/2006
- IC test bug fixed (introduced in 2.24)
- Auto YES! procedure setting improved
- remotecontrol system improved

################################################################################

PG4UW SW, version 2.24, issued 09/MAR/2006
- improving BeeProg/BeeHive4 programming speed
- Automatic YES! procedure improved
- Device info window, supporting information about ISP programming improved

################################################################################

PG4UW SW, version 2.23, issued 16/FEB/2006
- optimization of programming speed BeeProg/BeeHive4
- BeeProg/BeeHive4, SelftestPlus procedure improved
- more improvements of PG4UWMC for BeeHive4 stability and power
- serialization for Microchip PIC16Fxxx/18Fxxx/12Fxxx, bug fixed

################################################################################

PG4UW SW, version 2.22a, issued 19/JAN/2006
- multiprogramming control (Pg4uwMC) more improvements
- singleprogramming control (PG4UW) improvements - CPU usage decreased
- serialization system improved

################################################################################

PG4UW SW, version 2.22, issued 11/JAN/2006
- none

################################################################################

PG4UW SW, version 2.21a, issued 21/DEC/2005
- "Automatic YES!" procedure improved
- Calibration test system improved
- remote control improved
- main buttons toolbar precedence Classic/Denis
- Installation procedure improved

################################################################################

PG4UW SW, version 2.21, issued 01/DEC/2005
- find programmer procedure design improved

################################################################################

PG4UW SW, version 2.20, issued 10/NOV/2005

- added serialization of additional buffer (PICmicro EEPROM for example)
- Pg4uwMC software improved
- Buffer View/Edit improved for chips, they have x14, x12 or x10 organization

################################################################################

PG4UW SW, version 2.19, issued 13/OCT/2005
- BeeHive4 communication stability improved
- BeeHive4, site selftest improved
- BeeProg multiprogramming improved
- PG4UWMC improved
- BGA adapters identification bug fixed
- concurrent programming mode, serialization procedure bug fixed

################################################################################

PG4UW SW, version 2.18a, issued 20/SEP/2005
- starts BeeHive4 programmer support. More than 18700 chips supported.
- Multiprogramming control (PG4UWMC) software significantly improved
- Multiprogramming control, added support of SmartProg2 programmer
- Multiprogramming control, possibility to connect up to 8 BeeProg or SmartProg2
  programmers to one PC
- SmartProg2, find programmer bug fixed

################################################################################

PG4UW SW, version 2.18, issued 06/SEP/2005
- PG4UWMC (multiprogramming control) significantly improved
- ASCII HEX file format support added
- Buffer, Swap nibbles in byte function added

################################################################################

PG4UW SW, version 2.17, issued 11/AUG/2005
- command line parameters recognition improved

################################################################################

PG4UW SW, version 2.16, issued 12/JUL/2005
-  S-Motorola format recognition improved
- automatic Reload file bug fixed

################################################################################

PG4UW SW, version 2.14, issued 17/JUN/2005
- new HELP system, chm files used
- for testing purposes, the "Repetitive mode" has been added. See at "Repeat last activity" window for details

################################################################################

PG4UW SW, version 2.14, issued 12/MAY/2005
- automatic reload, file date refresh bug fixed
- SmartProg, SmartProg2, PIKprog+, T51prog, MEMprog, ESD warning added
- Setu, new version used

################################################################################

PG4UW SW, version 2.13, issued 21/APR/2005
- BeeProg, "Automatic YES" behavior bug fixed
- T51prog, PIKprog+, MEMprog and SmartProg, find programmer procedure improved (case EC: 1B)
- PG4UW multiprogramming center (PG4UWMC.EXE software) considerable improved

################################################################################

PG4UW SW, version 2.12a, issued 31/MAR/2005
- added IC logos pictures, as shown at top of the ICs
- SmartProg2 programmer speed increased
- MEMprogL programmer full support issued

################################################################################

PG4UW SW, version 2.12, issued 17/MAR/2005
- BGA packages support implemented
- remote control of PG4UW software by remotelb.dll added
- new version of VME player implemented (V11.0.1), VME3.0. format accepted
- added JTAG compatible chips programming in daisy chain configuration using JAM and VME player

################################################################################

PG4UW SW, version 2.11a, issued 25/FEB/2005
- SmartProg, HW version 3 or below, selftest plus procedure bug fixed
- project file handling and command line handling for JAM and VME player
- SelfTest/SelfTest plus procedures reporting improved for all programmers
- LOG window reporting improved
- Installation procedure improved

################################################################################

PG4UW SW, version 2.11, issued 07/FEB/2005
- LOG file and ERR file, select destination file added
- Options/General options improved
- Support of handler added also for BeeProg programmer

################################################################################

PG4UW SW, version 2.10, issued 20/JAN/2005
- INI file manipulation improved

################################################################################

PG4UW SW, version 2.09a, issued 22/DEC/2004
- Installation software improved

################################################################################

PG4UW SW, version 2.09, issued 09/DEC/2004
- project file interpretation improved
- special language support (Korean, Japan) bug fixed
- BeeProg, calibration check procedure bug fixed

################################################################################

PG4UW SW, version 2.08, issued 19/NOV/2004
- BeeProg programming speed dramatically increased
- location of INI file improved
- added IC manufacturer logos in the Select Device window
- added Calibration check procedure for BeeProg programmer

################################################################################

PG4UW SW, version 2.07, issued 21/OCT/2004
- Refind Programmer procedure improved
- Picure of T51prog ISP connector improved

################################################################################

PG4UW SW, version 2.06a, issued 30/SEP/2004
- Auto-reload file function improved
- "Find programmer" and "Refind programmer" shortkeys added
- Select device dialog improved

################################################################################

PG4UW SW, version 2.06, issued 09/SEP/2004
- added option switch on/off the advanced color mode

################################################################################

PG4UW SW, version 2.05, issued 24/AUG/2004
- PG4UW main window design changed (improved? - we hope)
- it was added information system abut chip labelling (meaning of prefixes
  and suffixes of chips)
- Automatic YES! system improved
- WIN-2000 and WIN-XP, INI file location changed to
  \Documents and Settings\Username\Application Data\ folder to avoid message
  "can not write INI file"

################################################################################

PG4UW SW, version 2.04, issued 21/JUL/2004
- Save buffer procedure improved (file extensions)
- Find programmer procedure improved

################################################################################

PG4UW SW, version 2.03, issued 17/JUN/2004
- load Tektronix HEX files improved
- load of Intel HEX files "improved". Because some manufacturers give wrong
  checksum at end of line, we must ignore this bug, because users yells, we
  are wrong. Well, new age, new approach.
- added "Demo mode". Command line parameter "/Demo" or "Esc" key during
  searching of the attached programmer start this mode.
- added possibility to attach more BeeProg programmers to one PC and achieve
  a simple, but powerful multiprogramming system. Run PG4UWMC.EXE and see
  help for details.

PG4UW SW, version 2.02b, issued 27/MAY/2004
- Load file procedure, "Erase buffer before loading" possibility added
- BeeProg, USB driver software identification improved.
- selftest of ISP connector (T51prog, PIKprog+, SmartProg and BeeProg) added

PG4UW SW, version 2.02a, issued 13/MAY/2004
- Split operation bug fixed
- Loading file, Buffer offset parameter added
- installation procedure, USB drivers location bug fixed

PG4UW SW, version 2.02, issued 05/MAY/2004
- BeeProg, USB connection bugs at WIN 98/Me/2000 bug fixed

PG4UW SW, version 2.01a, issued 26/APR/2004
- PREPORM-02aLV, SEEprog and PREPROM-02 support in WIN-NT/2000/XP bug fixed

PG4UW SW, version 2.01, issued 22/APR/2004
- it was added a package drawings of each supported chip.
- "External exception" bug in the case of PC486 fixed

PG4UW SW, version 2.00, issued 31/MAR/2004
- Buffer of default devices (<F5>) remembers special settings of all (max. 20)
  devices. Program saves these informations to INI and PRJ files automatically
- "Device info" dialog window improved - button "See adapters.txt"
- "Save project" dialog window improved - checkbox for set of protected mode

PG4UW SW, version 1.62, issued 21/MAR/2004
- none

PG4UW SW, version 1.61a, issued 20/FEB/2004
- /close command line parameter using bug fixed
- at /close command line parameter condition, behaviour of PG4UW software
  improved if some error during chip programming occur

PG4UW SW, version 1.61, issued 02/FEB/2004
- none

PG4UW SW, version 1.60c, issued 30/JAN/2004
- "Out of date" (of software version) warning added
- LPT ports identification procedure improved
- View/Edit buffer improved
- PG4UW behaviour in the case of remote controlling improved

PG4UW SW, version 1.60b, issued 20/JAN/2004
- Korean language support bug fixed

PG4UW SW, version 1.60a, issued 17/JAN/2004
- none

PG4UW SW, version 1.60, issued 08/JAN/2004
- PG4UW window foreground/background handling improved

PG4UW SW, version 1.59, issued 15/DEC/2003
- Automatic reload of changed file procedure improved

PG4UW SW, version 1.58a, issued 27/NOV/2003
- special command line parameter: /Eprom_Flash_autoselect[:xx] was added
- last applied serialization value is saved to file for next using

PG4UW SW, version 1.58, issued 06/NOV/2003
- LabProg-48LV/LabProg+, selftest procedure improved at WIN-NT/2000/XP
- fixed a bug (EC: 13) for T51prog, PIKprog+ and SmartProg programmers at some
  types of notebooks
- SmartProg and PIKprog+ interface improved. It is strongly recommended to use
  this (or later) version of SW to keep reliability level as high as possible.
- it was added two special modes (Repetitive mode and Random Repetitive mode)
  of software. If you reply to question Repeat? using (HOLD)Ctrl+R +E +P, the
  software will repeat previous action without asking a command from the operator.
  The Random Repetitive mode (activation: (HOLD)Ctrl+R +A +N) fill also the
  buffer by random data before starting a new action.
- View/Edit buffer section improved - in the x16 bit mode, ASCII search is - apart
  from HEX search - now possible

PG4UW SW, version 1.57, issued 22/OCT/2003
- LPT port detection improved
- installation procedure keep the language setting also for installed software

PG4UW SW, version 1.56a, issued 26/SEP/2003
- View/Edit Buffer window, the out-of-chip-addresses area in the buffer
  is shadowed.
- View/Edit Buffer window, jump to start/end of addresses, corresponding to
  the first/last address of chip, bug fixed.
- LPT port driver improved
- "Automatic YES!" bug fixed

PG4UW SW, version 1.56, issued 10/SEP/2003
- the new LPT port driver is attached to PG4UW package. Advantages:
  1. the driver prohibit the other programs the access to the LPT port,
     where is programmer attached.
  2. increasing the programming speed for T51Prog, PikProg, PikProg+
     and SmartProg programmer - valid for many chips and WIN NT/2000/XP
  3. WIN NT/2000/XP, detection of LPT ports improved

PG4UW SW, version 1.55a, issued 19/AUG/2003
- T51prog selftest/selftest+ bug fixed

PG4UW SW, version 1.55, issued 13/AUG/2003
- T51prog interface improved. It is strongly recommended for all T51prog users
  to upgrade the SW to this version.
- Fill random data procedure disabled for PLD chips as potential dangerous
- menu Serialization, Incremental serialization, choice "Split serial number"
  added. Suitable for PICmicro chips.
- Oleaut32.dll library installation modified (manually).

PG4UW SW, version 1.54, issued 16/JUL/2003
- Installation system of software improved.
- Uninstall procedure added.
- Load Project, some information in LOG Window added

PG4UW SW, version 1.53a, issued 26/JUN/2003
- added the compatibility of projects, created in the SINGLE-programming
  and MULTI-programming mode for PICmicro microcontrollers

PG4UW SW, version 1.53, issued 05/JUN/2003
- load/save file procedures improved

PG4UW SW, version 1.52, issued 15/MAY/2003
- none

PG4UW SW, version 1.51a, issued 29/APR/2003
- buffer checksum calculation procedure improved

PG4UW SW, version 1.51, issued 15/APR/2003
- Buffer window, new features added (resize, buffer window may be open
  together with main window)

PG4UW SW, version 1.50a, issued 27/MAR/2003
- MAC OS text files (CR terminated lines) recognizing bug fixed

PG4UW SW, version 1.50, issued 13/MAR/2003
-  it is possible to create Device lists for all programmers using
   only  one command.

PG4UW SW, version 1.49, issued 20/FEB/2003
- serialization procedure bug in the case of protected mode fixed
- serialization procedure timeout bug fixed
- secondary buffer view/edit bug fixed

PG4UW SW, version 1.48a, issued 30/JAN/2003
- multiprogramming section improved

PG4UW SW, version 1.48, issued 16/JAN/2003
- multiprogramming section improved

PG4UW SW, version 1.47a, issued 19/DEC/2002
- new command line parameters added. Check the HELP about details
- load/save project file, password encryption added

PG4UW SW, version 1.47, issued 05/DEC/2002
- recently selected devices list increased from 10 to 20
- split operation, handling from menu bug fixed
- PC486, processor type identification bug fixed
- buffer view/edit, previous cursor position saved and used
- serialization in the protected mode bug fixed

PG4UW SW, version 1.46a, issued 21/NOV/2002
- PG4UW at dual monitor behavior improved

PG4UW SW, version 1.46, issued 05/NOV/2002
- automatic load file procedure improved

PG4UW SW, version 1.45c, issued 22/OCT/2002
- automatic load file procedure bug fixed

PG4UW SW, version 1.45b, issued 18/OCT/2002
- none

PG4UW SW, version 1.45a, issued 15/OCT/2002
- locking of currently loaded file for another process bug fixed
- automatic reload file procedure improved

PG4UW SW, version 1.45, issued 01/OCT/2002
- automatic file format recognition bug fixed

PG4UW SW, version 1.44a, issued 27/SEP/2002
- write/show device list procedure, content and structure improvements
- all HEX formats loading improvements

PG4UW SW, version 1.44, issued 12/SEP/2002
- COMport-less PC, "Access violation..." bug problem fixed
- tested Static RAM list and tested TTL&CMOS IC list added to supported
  device list
- there is also shown order numbers of programming adapters and modules
  in the Device>Select Device and Help>Supported devices procedures

PG4UW SW, version 1.43a, issued 28/AUG/2002
- SmartProg, T51prog, PIKprog+, ISP/ZIF programming way indication added
- Windows NT/2000/XP delays improved

PG4UW SW, version 1.43, issued 13/AUG/2002
- some changes regarding to Hansung's autohandler support

PG4UW SW, version 1.42a, issued 23/JULY/2002
- none

PG4UW SW, version 1.42, issued 16/JULY/2002
- DLL library oleaut32.dll distribution added
- color management of PG4UW SW improved
- Tektronix HEX file format (simplyfied type) support added

PG4UW SW, version 1.41a, issued 27/JUNE/2002
- SmartProg, PCB version 3 support issued
- PIKprog+, PCB version 3 support issued
- negative offset field increased to 4 bytes
- Motorola HEX format saving bug fixed
- Motorola HEX format loading procedure improved

PG4UW SW, version 1.41, issued 03/JUNE/2002
- SmartProg, PCB version 2 support issued

PG4UW SW, version 1.40, issued 15/MAY/2002
- edit buffer procedure improved
- IntelHEX file load improved

PG4UW SW, version 1.39c, issued 30/APR/2002
- automatic Yes! function improved

PG4UW SW, version 1.39b, issued 25/APR/2002
- none

PG4UW SW, version 1.39a, issued 08/APR/2002
- none

PG4UW SW, version 1.39, issued 05/APR/2002
- PLD series devices project file support
- JetProg programmer internal sound generator supported
- added report to LOG window about each buffer content modification
- Device additional info window now have none effect to programming
  parameters settings

PG4UW SW, version 1.38c, issued 23/MAR/2002
- JetProg, selftest procedure improvements

PG4UW SW, version 1.38b, issued 20/MAR/2002
- LabProg+, PCB version 7 support issued

PG4UW SW, version 1.38a, issued 15/MAR/2002
- SmartProg programmer final support issued

PG4UW SW, version 1.38, issued 13/MAR/2002
- none

PG4UW SW, version 1.37b, issued 27/FEB/2002
- BIN file loading improved
- programmer-devices cross-reference table bug fixed

PG4UW SW, version 1.37a, issued 08/FEB/2002
- SmartProg programmer supported
- PIKprog+ programmer supported

PG4UW SW, version 1.37, issued 02/FEB/2002
- JetProg, serial no. 113197 and above  supported

PG4UW SW, version 1.36c(WIN), issued 29/JAN/2002
- installation bug fixed

PG4UW SW, version 1.36b(WIN), issued 28/JAN/2002
- maximal acceptable device size increased to 128MB

PG4UW SW, version 1.36a(WIN), issued 15/JAN/2002
- none

PG4UW SW, version 1.36(WIN), issued 11/JAN/2002
- none

PG4UW SW, version 1.35b(WIN), issued 21/DEC/2001
- PICmicro series, project file full-featured
- ASCII SPACE HEX file format handling improved
- Microchip PIC18Cxxx and PIC16C5x load file procedure improved
- Buffer / Duplicate buffer content procedure added
- menu Buffer / Checksum, default area now correspond with device size
- automatic reload file to buffer, refresh of shown values added

PG4UW SW, version 1.35a(WIN), issued 10/DEC/2001
- PREPROM-02aLV/-02, "Internal error 1" bug fixed
- PIC18Cxxx read file, cfg. bytes, bug fixed

PG4UW SW, version 1.35, issued 07/DEC/2001
- external manipulator (handler) control implemented
- there are shown all programming conditions before start of programming
- full-features project file capability for PICmicro series.

PG4UW SW, version 1.34a, issued 22/NOV/2001
- there is shown order. no. of adapters in the Additional Info window
  (if available)
- DEMO mode available for Win-NT/2000 too

PG4UW SW, version 1.34, issued 10/NOV/2001
- none

PG4UW SW, version 1.33b, issued 28/OCT/2001
- save project inhibit for such series of chips, where isn't saved all
  device related settings.
- menu item "Device/Device list" was moved to Help menu and renamed to
  "Device list (current programmer)"
- added new function - generate cross reference file chip / ELNEC programmers
  into menu "Help/Device list (cross reference)"

PG4UW SW, version 1.33a, issued 18/OCT/2001
- save file dialog, inability to save HEX formats bug fixed

PG4UW SW, version 1.33, issued 15/OCT/2001
- Reload File or Project menu splited to Reaload File and Reload Project menu
- Save Project, Protected mode setting options added

PG4UW SW, version 1.32c, issued 29/SEP/2001
- added new menu item Help/Supported devices that show all devices,
  supported by all ELNEC programmers
- associated file parameter in the project file ignored
- load file/load project improvements
- Select device procedure improved (Subclass -All)
- Protected mode improvements

PG4UW SW, version 1.32b, issued 14/SEP/2001
- some GUI improvements

PG4UW SW, version 1.32a, issued 10/SEP/2001
- JetProg programmer SPP/PS2 LPT mode slow running bug fixed

PG4UW SW, version 1.32, issued 05/SEP/2001
- automatic ELNEC SW project file extension with PG4UW program
- "Select EPROM by ID" changed to "Select EPROM/FLASH by ID"

PG4UW SW, version 1.31a, issued 27/AUG/2001
- load toolbar settings from INI file bug fixed
- availability of change of project extension added

PG4UW SW, version 1.31, issued 03/AUG/2001
- fixed bug in case of loading PRJ file
- added DEMO mode of PG4UW software for WIN NT/2000 too

PG4UW SW, version 1.30a, issued 25/JULY/2001
- support of PROJECT manager. If control program starts
  with parameter /PRJ:<project_name>, it loads a project file
  automatically

PG4UW SW, version 1.30, issued 09/JULY/2001
- support of EPROM/FLASH - 8ZIF module for JetProg programmer
- fixed bug in load file procedure in case of Intel HEX format

PG4UW SW, version 1.29b, issued 28/JUNE/2001
- some LOG window messages added

PG4UW SW, version 1.29a, issued 13/JUNE/2001
- LabProg+, SelfTest/SelfTest+ bug fixed

PG4UW SW, version 1.29, issued 07/JUNE/2001
- Windows NT/2000 pardrive.sys improved. Reinstalation necessary for
  T51prog programmer only.
- setup program modifications

PG4UW SW, version 1.28a, issued 29/MAY/2001
- none

PG4UW SW, version 1.28b, issued 24/MAY/2001
- beta version, not issued for public

PG4UW SW, version 1.28a, issued 22/MAY/2001
- none

PG4UW SW, version 1.28, issued 12/MAY/2001
- internal improvements

PG4UW SW, version 1.27c, issued 30/APR/2001
- LOG file messages mode improved

PG4UW SW, version 1.27b, issued 23/APR/2001
- fixed bug in acces to PG4U.INI file

PG4UW SW, version 1.27a, issued 21/APR/2001
- fixed bug in acces to slovak language version file

PG4UW SW, version 1.27, issued 19/APR/2001
- Load/Save File dialogs improved
- Info window, changed font
- other less-important improvements

PG4UW SW, version 1.26c, issued 31/MAR/2001
- added some more informations shown in LOG window
- list of supported devices is generated in HTML format too

PG4UW SW, version 1.26b, issued 19/MAR/2001
- View/Edit buffer window improvements

PG4UW SW, version 1.26a, issued 13/MAR/2001
- internal improvements

PG4UW SW, version 1.26, issued 01/MAR/2001
- save file (Intel HEX format) in case of PICmicro bug fixed
- added full german support

PG4UW SW, version 1.25b, issued 28/FEB/2001
- fixed bug in JetProg FPGA library

PG4UW SW, version 1.25a, issued 23/FEB/2001
- fixed bug in switching buffer view mode
- added german language support (HELP)

PG4UW SW, version 1.25, issued 09/FEB/2001
- full support of JetProg programmer
- load file procedure improved

PG4UW SW, version 1.24c, issued 31/JAN/2001
- buffer underflow/overflow bug fixed
- some buttons added
- improvements of some graphic
- menu Edit/View improved
- first initialization of SW shorted

PG4UW SW, version 1.24b, issued 16/JAN/2001
  none

PG4UW SW, version 1.24a, issued 12/JAN/2001
- Setup program install drivers for WIN NT and WIN 2000 automatically
- corrected date of SW version from 2000 to 2001

PG4UW SW, version 1.24, issued 09/JAN/2001
  none

PG4UW SW, version 1.23b, issued 22/DEC/2000
- internal improvements

PG4UW SW, version 1.23a, issued 15/DEC/2000
  none

PG4UW SW, version 1.23, issued 07/DEC/2000
- merged external configuration files into only one (PG4UW.INI)
- fixed error in WIN_NT driver PARDRIVE.SYS

PG4UW SW, version 1.22d, issued 30/NOV/2000
- full WIN NT/2000 support using our own drivers
- user interface improvements

PG4UW SW, version 1.22c, issued 17/NOV/2000
- little corrections for Slovak language support
- improvements for other languages support

PG4UW SW, version 1.22b, issued 10/NOV/2000
  none

PG4UW SW, version 1.22a, issued 09/NOV/2000
- AutoYES! figure unwanted blinking removed
- added generationg of sound messages using PC speaker
- multiply running  of PG4UW sofware forbidden
- changed HELP filenames according to ISO
- Device info improved
- Added posibility to add another languages as english

PG4UW SW, version 1.22, issued 03/NOV/2000
- fixed bug 'Access violation error' in Device/Options/Associated File
  in case Automatic load = 'Yes'

PG4UW SW, version 1.21c, issued 17/OCT/2000
- fixed a bug in Select device section in case Korean/Japaneese WIN98/2000

PG4UW SW, version 1.21b, issued 12/OCT/2000
- changes for OEM versions support

PG4UW SW, version 1.21a, issued 05/OCT/2000
- added Split buttons bar
- speed-up select device procedure
- load preferential file bug fixed

PG4UW SW, version 1.21, issued 03/OCT/2000
- loading HELP file bug fixed

PG4UW SW, version 1.20a, issued 30/SEP/2000
- Load/Save File improvements

PG4UW SW, version 1.20, issued 22/SEP/2000
- first issue of 32-bit software (sorry about imperfection, if you found)
- load JED file improvement
- full support of long names of files, directories, etc.
- little changes in menu Options
- instalation procedure was changed to standard way (Setup program)

PG4UW SW, version 1.18, issued 14/SEP/2000
  none

PG4UW SW, version 1.17a, issued 03/AUG/2000
  none

PG4UW SW, version 1.17, issued 02/AUG/2000
- added adaptive file loading mode. Buffer size is adaptive changed respective
  to the size of file during loading process
- there is possible to view Log Window content (Shift+Alt+L)
- improved amount of information that are writed to Log Window
- corrected resetting of used port by programmer after terminating of
  control program in case LabProg-48LV programmer.
- fixed a bug in edit buffer PLD if edit UES

PG4UW SW, version 1.16c, issued 21/JUL/2000
  none

PG4UW SW, version 1.16b, issued 18/JUL/2000
- fixed a bug for Load/Save encryption table

PG4UW SW, version 1.16a, issued 12/JUL/2000
- added record format 04 into Intel Hex save procedure

PG4UW SW, version 1.16, issued 04/JUL/2000
- added 8/16 byte view buffer mode
- added "write list of supported devices" procedure

PG4UW SW, version 1.15b, issued 22/JUN/2000
- internal improvements for new update of LabProg-48LV hardware

PG4UW SW, version 1.15a, issued 20/JUN/2000
- JEDEC file load improved
- added ELNEC order numbers for modules/package convertors in device list
  to avoid mistakes in orders

PG4UW SW, version 1.15, issued 09/JUN/2000
- added support of long filenames (directory names excluded)

PG4UW SW, version 1.14c, issued 26/MAY/2000
- added SRAM test
- LED BUSY is blinking in case Automatic YES! mode and programmer is
  awaiting for a new device to be inserted in ZIF
- added response time setting in Automatic YES! function
- added Statistic and Count Down feature
- fixed a multiple access on not-ready drive A:/B:
- fixed a additional sound after standard sound message
- serialization status is now saved into SET file

PG4UW SW, version 1.14b, issued 18/MAY/2000
none

PG4UW SW, version 1.14a, issued 12/MAY/2000
- added extended Sound control possibility
- added Print buffer capability
- dialog Load file/Save file, added View button
- added Erase button on screen

PG4UW SW, version 1.14, issued 04/MAY/2000
- added Automatic YES! feature

PG4UW SW, version 1.13d, issued 27/APR/2000
- INI, SET and CFG files are saved in PG4UW.EXE directory only
- startup directory from properties is now accepted

PG4UW SW, version 1.13c, issued 18/APR/2000
- internal improvements

PG4UW SW, version 1.13b, issued 15/APR/2000
- modified Serialization mode, added "Read S/N From File" mode

PG4UW SW, version 1.13a, issued 06/APR/2000
- added slovak language support

PG4UW SW, version 1.13, issued 31/MAR/2000
- internal improvements

PG4UW SW, version 1.12e, issued 22/MAR/2000
- fixed a bug if attempt to load file from non-present drive

PG4UW SW, version 1.12d, issued 17/MAR/2000
- added recent files capability
- changed load/save file dialog window, file size/time are shown permanently
- fixed a bug in file mode autodetection routine
- added mesage about VCC level during verify process
- improvements in buffer view/edit procedure

PG4UW SW, version 1.12c, issued 14/MAR/2000
- view/edit buffer, improved insert, search, search/replace procedures
- fixed a bug for view buffer and windows small fonts setting
- fixed a bug during "repeat last activity" procedure for programmers
  PREPROM-02 and  SEEprog

PG4UW SW, version 1.12b, issued 10/MAR/2000
- fixed a bug - previous version wasn't runing without BDE support

PG4UW SW, version 1.12a, issued 08/MAR/2000
- internal improvements

PG4UW SW, version 1.12, issued 07/MAR/2000
- Load/Save file dialogs modifyed
- calculated checksum is possible to insert into buffer directly
- fixed a bug for Edit Buffer

PG4UW SW, version 1.11, issued 02/MAR/2000
- internal improvements

PG4UW SW, version 1.10, issued 24/FEB/2000
- display resolution may be 640x480
- added Fill buffer by random data
- added progress bar in Info window
- added multiply self test command
- fixed bug for "view additional info"
- fixed bug in "select microcontrollers by class"
- erase buffer bug fixed
- fixed a bug for Buffer/Copy
- "first look" improvements

PG4UW SW, version beta3, issued 16/FEB/2000
- HEX file reading system accept lowercases in input file
- fixed a bug for JEDec file load/save

PG4UW SW, version beta2a, issued 14/FEB/2000
- internal improwements

PG4UW SW, version beta2, issued 10/FEB/2000
- added HELP system (english)
- "first look" improvements
- fixed a bug for Flash page programming (using PREPROM-02/-02aLV only)
- corrected information in "About" window

PG4UW SW, version beta1, issued 2/FEB/2000, initial release.
  Restrictions (missing parts):
    - HELP system
    - IC test
    - STATIC RAM test
    - Auto repeat of SELFTEST for LabProg-48LV and PREPROM-02aLV programmer
    - min. resolution: 800 by 600 pixels