Device: A29002U [TSOP32]
Manufacturer: Amic
Part number description for this device:
|
A
XXX
XXX
X
X
XX
-
XX
|
| Move the cursor over the box to highlight particular section |
A |
AMIC |
|
XXX |
Family Descriptor |
29 = Boot sector flash memory29DL = CMOS low voltage, Dual operation flash memory29L = CMOS 3.0V only boot sector flash memory |
XXX |
Density |
001, 0011 = 128kx8002, 0021 = 256kx8008 = 1Mx8010 = 128x8004, 040 = 512x8160, 162, 163, 164 = 2Mx8 / 1Mx16320, 323, 324 = 4Mx8 / 2Mx16640 = 8Mx8 / 4Mx16400 = 512kx8 / 256kx16512 = 64kx8800, 801 = 1Mx8 / 512kx16016 = 2Mx8 |
X |
Revision |
BlankA = A-versionB = B-versionF = F-version |
X |
Boot Block Architecture |
U = Bottom boot blockT = Top boot blockBlank = Uniform sector |
XX |
Package Type |
Blank = Plastic DIPL = PLCCV, W = TSOPM = PSOPG = TBGA, TFBGAX = sTSOP (8mmx14mm) |
XX |
Access Time |
55 = 55 ns70 = 70 ns90 = 90 ns120 = 120 ns150 = 150 ns |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result page
Supported by programmers and programming adapters/modules:
go back to result page