Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: MX29F200CT [PSOP44]

Manufacturer: Macronix

Part number description for this device:

Move the cursor over the box to highlight particular section
MX Macronix  
XX Device Number 26 = High speed eLiteFlash memory28 = FLASH29 = Single Voltage FLASH68 = Stack die Flash
X Process C = CMOS FlashF = 5V FlashL, LV = Low-Voltage, 3.3V FlashLW = Lov-Voltage, 3.3V Pagemode FlashLA = 3V SecurityBL = 3V with Write BufferGL = 3V Page modeGA = 3V Security FlashV = 2.2VU, SL = 1.8VNS, VS = 1.8V Burst ModeX = 1.5V
XXXX Capacity & Mode 004 = 512kx8, Boot block040 = 512kx8, Equal sector008 = 1Mx8, Boot block080, 081 = 1Mx8, Equal sector100 = 128kx8 / 64kx16200 = 256kx8 / 128kx16400, 401 = 512kx8 / 256kx16, Boot Block800 = 1Mx8 / 512kx161610, 1611, 1615, 160, 161 = 2Mx8 / 1Mx163211, 320 = 4Mx8 / 2Mx16640 = 8Mx8 / 4Mx16641 = 4Mx16001 = 128kx8002, 002N = 256kx8022, 022N = 256kx81000, 1000P = 128kx82000T, 2000P = 256kx82100 = 128kx168000 = 1Mx88100, 8100G, 800 = 1Mx8 / 512kx16016, 017 = 2Mx8033 = 4Mx8, Equal sector161 = 2Mx8 / 1Mx16 or 1Mx16321 = 8Mx8 / 2Mx16065 = 8Mx8, Equal sector402 = 4Mb x8/x16 boot block128, 129 = 128Mb x8/x16 boot block256 = 256Mb x8/x16 uniform block257 = 256Mb x16 uniform block1G0 = 1Gb x8/x16 architecture
X Version BlankA = A-versionB = B-versionC = C-versionD = D-versionM = M-versionE = E-versionF = F-version
X Sector Architecture BlankT = Top boot sectorB = Bottom boot sectorU = Equal sectorH = High sectorL = Low sectorC = Highest address sector protected with read protectionF = Lowest address sector protected with read protectionXJ = TFBGA, 0.5mm pitch, 0.3mm ball size
X Package Type P = Plastic DIPC = Ceramic DIPK = Skinny DIPM = Plastic SOPQ = PLCCD = CerDIPF = Plastic QFPT = TSOPR = TSOP reverseX = FBGA(CSP)XB = TFBGA(CSP), 0.8 mm ball pitch / 0.3 mm ball sizeXC = FBGA(CSP), 1.0mm ball pichXE = LFBGA, FBGA(CSP), 0.8 mm ball pitch / 0.4 mm ball sizeXF = LFBGA (11mm x 13mm)XG = TBGA(CSP), 0.8 mm ball pitch / 0.4 mm ball sizeXH = WFBGA, 0.5mm ball pitch, 0.3mm ball sizeXJ = TFBGA56 (7.7x6.2mm),0.5mm pitch/0.3mm ball sizeXL = TFBGA56 (7.7x6.2x1.05nn)GB = XFLGA, 0.5mm land pitch, 0.25mm land opening
X Temperature Range C = CommercialI = IndustrialM = Military
XX Speed Option 45 = 45 ns55 = 55 ns70 = 70 ns80 = 80 ns90 = 90 ns10 = 100 ns11 = 110 ns12 = 120 ns15 = 150 ns20 = 200 ns
X Option BlankG = Lead-free packageQ = RoHS compliant; Vcc=3.0V to 3.6V
XX Cycling (FLASH) BlankC3 = 1000C4 = 10000C5 = 100000

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Bottom PSOP44 NOR-1 (70-1231) Top PSOP44 ZIF 600mil (70-1232)
BeeHive204AP adapter/module: AP1 PSOP44 ZIF 600mil NOR-1 (71-1962)
BeeHive208S adapter/module: Bottom PSOP44 NOR-1 (70-1231) Top PSOP44 ZIF 600mil (70-1232)
BeeProg2 adapter/module: Bottom PSOP44 NOR-1 (70-1231) Top PSOP44 ZIF 600mil (70-1232)
BeeProg2AP adapter/module: AP1 PSOP44 ZIF 600mil NOR-1 (71-1962)
BeeProg2C adapter/module: Bottom PSOP44 NOR-1 (70-1231) Top PSOP44 ZIF 600mil (70-1232)
BeeHive204AP-AU (discontinued) adapter/module: AP1 PSOP44 ZIF 600mil NOR-1 (71-1962)
go back to result page
🍪
Back to TOP