Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: dsPIC33FJ32GP101

Manufacturer: Microchip

Part number description for this device:

Move the cursor over the box to highlight particular section
dsPIC Microchip Trademark  
XX Architecture 24 = 16-bit microcontroller33 = 16-bit digital signal controller
XX Flash Memory Family CH = Dual coreCK = Single coreFJ = Flash program memory, 3.3VEP = Enhanced Performance
XXX Program Memory Size (kB) 06 = 6kB12 = 12kB16 = 16kB32 = 32kB64 = 64kB128 = 128kB256 = 256kB512 = 512kB
XXX Product Group GP2, GP3, GP5, GP7, GP8 = General purpose familyMC2, MC3, MC5, MC7, MC8 = Motor control familyGS1, GS2, GS4, GS5 = Switch mode power supply (SMPS) familyMU8 = Motor Control family with USBGU8 = General Purpose family with USBMP = Motor control/Power supply
XX Pin Count 01 = 18-pin02 = 28-pin03 = 36-pin04 = 44-pin06 = 64-pin08 = 80-pin10 = 100-pin, 121-pin14 = 144-pin
X Tape and Reel Flag(if applicable)  
X Temperature Range I = Industrial (-40°C to 85°C)E = Extended (-40°C to 125°C)
/    
XX Package Type 2N = 6x6mm UQFNBG = 10x10mm XBGA(Ball Grid Array)M4 = 6x6mm UQFNM5 = 5x5mm UQFNM6 = 4x4x0.6mm UQFNML = 6x6mm or 8x8mm body QFNMM = 6x6x0.9mm body QFN-SMR = 9x9mm QFN(Plastic Quad Flatpack)MX = 6x6x0.5mm UQFNP = 300mil PDIPPF = 14x14mm TQFP(Thin Quad Flatpack)PH = 16x16mm TQFP(Thin Quad Flatpack)PL = 20x20mm LQFP(Low-Profile Quad Flatpack)PT = 7x7mm or 10x10mm or 12x12mm TQFP(Thin Quad Flatpack)SO = 300mil body SOICSP = 300mil body SPDIPSS = 5.30mm body SSOP
XXX Pattern  

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 direct connection
BeeHive208S direct connection
BeeHive304 adapter/module: AP3 DIL48 (73-3319)
BeeProg2 direct connection
BeeProg2C direct connection
BeeProg3 adapter/module: AP3 DIL48 (73-3319)
go back to result page
🍪
Back to TOP