Device: M29W010B [TSOP32]
Manufacturer: STMicroelectronics
Part number description for this device: |
M XX X XXX X - XX X X X XX |
Move the cursor over the box to highlight particular section |
XX | Family Descriptor | 28 = FLASH29 = Single Supply Flash memory29K = LightFlash50 = Flash memory for PC BIOS29D = Dual or Multiple Bank Flash |
X | Operating Voltage | F = 5VW = 2.7V to 3.6VV = Low-voltageFLW = Firmware Hub/Low pin count interface, Vcc=2.7V to 3.6VLPW = Low pin count interface, Vcc=2.7V to 3.6V |
XXX | Density | 004, 004B = 512kx8008, 008A = 1Mx8010B = 128kx8, Uniform block017D = 2Mx8, Uniform block022B = 256kx8040, 040B = 512kx8, Uniform block102B = 64kx16160B, 160D, 160E = 2Mx8 / 1Mx16200B = 256kx8 / 128kx16320D, 320E = 4Mx8 / 2Mx16400, 400B, 400D, 400F = 512kx8 / 256kx16512B = 64kx8640D, 640F, 640G, 064F = 8Mx8 / 4Mx16641D = 4Mx16, Uniform block800, 800A, 800D = 1Mx8 / 512kx16128F, 128G = 16Mx8 / 8Mx16, Uniform block256G = 32Mx8 / 16Mx16, Uniform block640GS = 64Mbit (x8/x16), boot block, uniform or boot block, secure flash memory |
X | Boot Block Architecture | T = Top Boot BlockB = Bottom Boot BlockH = Protection on highest address blockL = Protection on lowest address block |
XX | Speed Option | 55, 5A = 55 ns60 = 60 ns70, 7A = 70 ns80 = 80 ns90 = 90 ns100 = 100 ns120 = 120 ns |
X | Power Supplies | Blank = Vcc +/-10%, Vpp +/-5%X = Vcc +/-5%, Vpp +/-5%Y = Vcc +/-10%, Vpp +/-10% |
X | Package Type | P = Plastic DIPN, NA = TSOP40, TSOP48NB = TSOP56K = PLCCZA, ZB, ZF = TBGA, TFBGA, LFBGAZS = LBGA, FBGAM = PSOPB = Plastic DIP32C = PLCC32NZ = TSOP32 |
X | Temperature Range | 0, 1 = 0°C to 70°C3 = -40°C to 125°C5 = -20°C to 85°C6 = -40°C to 85°C |
XX | Option | T, S = Tape & ReelR = Reverse pinoutBlank = Standard packingE = Lead-free package, Standard packingF = Lead-free package, Tape & Reel packing |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result page
Supported by programmers and programming adapters/modules:
BeeHive204 | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) + Top TSOP32 ZIF 18.4mm (70-1250) |
BeeHive204AP | adapter/module: AP1 TSOP32 ZIF 18.4mm (71-1925) |
BeeHive208S | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) + Top TSOP32 ZIF 18.4mm (70-1250) |
BeeProg2 | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) + Top TSOP32 ZIF 18.4mm (70-1250) |
BeeProg2AP | adapter/module: AP1 TSOP32 ZIF 18.4mm (71-1925) |
BeeProg2C | adapter/module: DIL32/TSOP32 ZIF 18.4mm (70-0399) OR Bottom TSOP32 NOR-2 (70-1247) + Top TSOP32 ZIF 18.4mm (70-1250) |
SmartProg2 | adapter/module: DIL32/TSOP32 ZIF 18.4mm Flash (70-0136) |
BeeHive204AP-AU (discontinued) | adapter/module: AP1 TSOP32 ZIF 18.4mm (71-1925) |
MEMprog2 (discontinued) | adapter/module: DIL32/TSOP32 ZIF 18.4mm Flash (70-0136) |