Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: Am29LV002BT [R-TSOP40]

Manufacturer: AMD

Part number description for this device:

Move the cursor over the box to highlight particular section
Am AMD Products  
XXXX Family Signature 29BDS = 1.8V, simultaneous Read/Write, Burst Mode29DS = 1.8V, simultaneous Read/Write29PDS = 1.8V, simultaneous Read/Write, Pge mode29SL = 1.8V Flash29BDD = 2.5V, simultaneous Read/Write, Burst mode29LV = 3V Flash29DL = 3V, Simuiltaneous Read/Write29BL = 3V, Burst mode29PL = 3V, Page mode29PDL = 3V, Simultaneous Read/Write, Page mode30LV = 3V, Ultra NAND29F = 5V Flash
XXX Density, Bus Width and Sector Organization 001, 010 = 128kx8002 = 256kx8004, 040 = 512kx8008, 080, 081 = 1Mx8016, 017, 116 = 2Mx8032, 033 = 4Mx8065 = 8Mx8100 = 64kx16160 = 2Mx8 / 1Mx16200 = 128kx16320 = 4Mx8 / 2Mx16400 = 256kx16640, 641 = 4Mx16800 = 1Mx8 / 512kx16
(X) Optional Parameter N = No RESET inputA = 5V-Only Program and Erase
X Process Technology B = 0.32 um technologyC = 0.32 um thin-film technologyD = 0.23 um thin-film technologyG = 0.17 um thin-film technologyM = MirrorBit technology
XX Sector Architecture and Sector Write Protection T = Top boot sectorB = Bottom boot sectorH = Uniform sector device, highest address sector protectedL = Uniform sector device, lowest address sector protectedU, Blank = Uniform sector deviceJ40 = (Ultra NAND only) 100\% usable blocks
XXX Speed Option, Voltage Regulation 1.8V devices:xx(x) = (29SL,DS) indicates speed in ns, Vcc=1.8V to 2.2VxA, xB = (29BDS) digits indicates asynchronous speed (5=55ns, 7=70ns, 9=90ns, 11=110ns),letter represents burst mode speed and handshaking availability(A=40MHz, B=54MHz), Vcc=1.7V to 1.9V3V devices:xx(x) = indicates speed in ns or MHz, device is full voltage range, Vcc=2.7V to 3.6Vxx(x)R = 2 or 3 digits indicate speed in ns, „R“ indicates regulated voltage range Vcc=3.0V to 3.6Vx(x)1(R) = (29LV64X) first two digits indicate speed in nsx10. „1“ indicates Vio < Vcc, „R“, if present indicatregulated voltage range5V devices:x(x)0 = speed option ends in „0“: indicates speed in ns., Vcc=5V +/- 10\\%x5 = speed option ends in „5“: indicates speed in ns
X Package Type P = Plastic DILJ = Plastic LCCS = SOPZ = SSOPE = TSOPE2 = TSOP IIF = reverse TSOPF2 = reverse TSOP IIK = 80-pin PQFP0.8mm ball pitch (unless otherwise noted):MA = 63-ball FBGA (11x12mm)VA = 44-ball FBGA (9.2x8mm, 0.5mm pitch)VR = 48-ball, VFBGA (8.15x6.15mm)WA = 48-ball FBGA (6x8mm)WB = 48-ball, FBGA (6x9mm)WC = 48-ball, FBGA (8x9mm)WD = 63-ball, FBGA (8x14mm)WG = 40-ball, FBGA (8x15mm)WH = 63-ball, FBGA (12x11mm)WK = 47-ball, FBGA (7x10mm, 0.5mm pitch)WL = 48-ball, (11x10mm, 0.5mm pitch)WM = 48-ball, (6x12mm)WN = 84-ball, FBGA(11x12mm)WP = 84-ball, FBGA(FBF084)1.0mm ball pitch (unless othervise noted):PA = 64-ball, BGA (13x11mm, 1.7mm)PB = 80-ball, BGA (13x11mm)PC = 64-ball, BGA (13x11mm)PE = 80-ball, BGA (10x15mm)
X Temperature Range C = Commercial (0°C to 70°C)D = Commercial (0°C to 70°C) with Pb-free packageI = Industrial (-40°C to 85°C)F = Industrial (-40°C to 85°C) with Pb-free packageV = Automotive in-cabin (-40°C to 105°C)Y = Automotive in-cabin (-40°C to 105°C) with Pb-free packageE = Extended
X Optional Proccessing Blank = Standard ProccessingN = ESN devicesB = Burn-in

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Bottom R-TSOP40 NOR-1 (70-1235) + Top TSOP40 ZIF 18.4mm (70-1243)
BeeHive204AP adapter/module: AP1 R-TSOP40 ZIF 18.4mm NOR-1 (71-1969)
BeeHive208S adapter/module: Bottom R-TSOP40 NOR-1 (70-1235) + Top TSOP40 ZIF 18.4mm (70-1243)
BeeProg2 adapter/module: Bottom R-TSOP40 NOR-1 (70-1235) + Top TSOP40 ZIF 18.4mm (70-1243)
BeeProg2AP adapter/module: AP1 R-TSOP40 ZIF 18.4mm NOR-1 (71-1969)
BeeProg2C adapter/module: Bottom R-TSOP40 NOR-1 (70-1235) + Top TSOP40 ZIF 18.4mm (70-1243)
BeeHive204AP-AU (discontinued) adapter/module: AP1 R-TSOP40 ZIF 18.4mm NOR-1 (71-1969)
go back to result page
🍪
Back to TOP