Programmers | Adapters | Elnec | Universal | Production | Device
show-menu
0 items | view cart Elnec online orders

Device: AT25DF021 (ISP)

Manufacturer: Atmel

Part number description for this device:

Move the cursor over the box to highlight particular section
AT Atmel  
XXXX Product Family 25DF = SPI serial flash memory25DQ = SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support
XX Devcie Density 02 = 2Mbit04 = 4Mbit08 = 8Mbit16 = 16Mbit32 = 32Mbit64 = 64Mbit
X Interface 1 = Serial
X Device Revision BlankA
XX Package Option S = SOIC8, 208milSS = SOIC8, 150milS3 = SOIC16, 300milM = UDFN8, 6x5x0.6mmMW = VDFN8, 8x6x1mm
XX Device Grade H = NiPdAu lead finish, industrial temp. range (-40°C to 85°C)
XX Operating Voltage Blank = 2.7V to 3.6VF = 2.3V to 3.6V
XX Shipping Carrier Option B = Bulk (tubes)Y = TraysT = Tape and reel

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Note: via ISP connector
BeeHive204AP adapter/module: Note: via ISP connector
BeeHive208S adapter/module: Note: via ISP connector
BeeProg2 adapter/module: Note: via ISP connector
BeeProg2AP adapter/module: Note: via ISP connector
BeeProg2C adapter/module: Note: via ISP connector
SmartProg2 adapter/module: Note: via ISP connector
BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page
🍪
Back to TOP