Universal & Production Device Programmers, Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: CAT59C11/A/H/I (ISP)

Manufacturer: Catalyst (CSI)

Part number description for this device:

Move the cursor over the box to highlight particular section
CAT Catalyst  
XX Family Descriptor 32, 33 = MW serial EEPROM (3V supply voltage)
35 = MW serial EEPROM (5V supply voltage)
64 = SPI compatible serial EEPROM
93 = MW serial EEPROM
X Technology Blank = CMOS
C = CMOS
LC = Low power CMOS
HC = High speed CMOS
XXX Density 10, 46, 101 = 1kbit
20, 56, 57, 102, 202 = 2kbit
40, 66, 104, 204 = 4kbit
76, 108 = 8kbit
86, 116 = 16kbit
-XX Package Type -P = PDIP8
-S = SOIC8
-J = SOIC8 90 degrees turned
-U = TSSOP8
-UR = TSSOP8 90 degrees turned
X Temperature Range Blank = Commercial
I = Industrial
A = Automotive
E = Extended
XX Operating Voltage Blank = 2.5V to 6.0V
1.8 = 1.8V to 6.0V

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Note: via ISP connector
BeeHive204AP adapter/module: Note: via ISP connector
BeeHive208S adapter/module: Note: via ISP connector
BeeProg2 adapter/module: Note: via ISP connector
BeeProg2AP adapter/module: Note: via ISP connector
BeeProg2C adapter/module: Note: via ISP connector
BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
SmartProg2 (discontinued) adapter/module: Note: via ISP connector
go back to result page
🍪
Back to TOP