Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: EN29F002ANB

Manufacturer: Eon Silicon Sol.

Part number description for this device:

Move the cursor over the box to highlight particular section
EN EON Silicon Devices  
XXXX Family Descriptor 29F = Flash, 5.0V29LV = Flash, 3.0V Read/Program/Erase29SL = Flash, 1.8V Read/Program/Erase29PL = Flash, 3.0V Read/Program/Erase, page erase39LV = Flash, 3.0V Read/Program/Erase, 4kB uniform sector39SL = Flash, 1.8V, 4kB uniform sector
XXXX Density 002 = 2Mbit (256Kx8)010 = 1Mbit (128kx8)040, 040J = 4Mbit (512Kx8)080 = 8Mbit (1Mx8)160, 160J = 16Mbit (2Mx8 / 1Mx16)320 = 32Mbit (4Mx8 / 2Mx16)400J = 4Mbit (512Kx8 / 256x16)512 = 512kbit (64kx8)800 = 8Mbit (1Mx8 / 512x16)032 = 32Mbit (2Mx16)064 = 64Mbit (4Mx16)
X Version Identifier BlankA = A-versionB = B-versionC = C-version
X Optional Parameter N = Without RESET functionBlank = With RESET function
X Boot Block Architecture BlankT = Top BlockB = Bottom Block
XXX Speed 45 = 45 ns55 = 55 ns70 = 70 ns90 = 90 ns70R = 70 ns (Regulated range 3.0V to 3.6V)
X Package Type P = Plastic DIPJ = PLCCT = TSOP 8mm x 20mmS = TSOP 8mm x 14mmB = FBGAN = WFBGA, 0.50mm pitch, 4mm x 6mmK = WLGA, 0.5mm pitch, 5mm x 6mmB = TFBGA, 0.8mm pitch, 6mm x 8mm
X Temperature Range Blank = CommercialI = Industrial
X Packing Content Blank = ConventionalP = Pb free

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 direct connection
BeeHive208S direct connection
BeeProg2 direct connection
BeeProg2C direct connection
SmartProg2 direct connection
MEMprog2 (discontinued) direct connection
go back to result page
🍪
Back to TOP