Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: MX25V1635F (ISP)

Manufacturer: Macronix

Part number description for this device:

Move the cursor over the box to highlight particular section
XX Manufacturer MX = Macronix
XX Family Descriptor 25 = Serial flash
X Type R = Wide Vcc range (1.7V to 3.6V)
XXXXXX Density & Mode 6435F = 64Mbit
XX Package Type M2 = 8-SOP(200mil)ZN = 8-WSON(6x5mm)ZA = 8-USON(4x4mm)BB = 16-Ball WLCSP
X Temperature Range I = Industrial (-40°C to 85°C)
X Option 1 L = Ultra Low Power Mode (Default)P = Ultra Low Power Mode (Default), Permanent fixed QE bit=1H = High Performance Mode (Default)Q = High Performance Mode (Default), Permanent fixed QE bit=1
X Option 2 01.65V to 3.6V, RESET#V = 2.3V to 3.6V, RESET#U = 1.65V to 2.0V, RESET#1 = 1.65V to 3.6V, HOLD#H = 2.3V to 3.6V, HOLD#G = 1.65V to 2.0V, HOLD#

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Note: via ISP connector
BeeHive204AP adapter/module: Note: via ISP connector
BeeHive208S adapter/module: Note: via ISP connector
BeeProg2 adapter/module: Note: via ISP connector
BeeProg2AP adapter/module: Note: via ISP connector
BeeProg2C adapter/module: Note: via ISP connector
SmartProg2 adapter/module: Note: via ISP connector
BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page
🍪
Back to TOP