Device: MCP795B10 (ISP)
Manufacturer: Microchip
Part number description for this device:
Move the cursor over the box to highlight particular section| MCP | ||
| XXX | Base Part Number | MCP794 = I2C RTTC MCP795 = SPI RTTC |
| X | Additional Features | Blank = None W = Watchdog timer, 2 event detects B = 32 kHz boot-up clock, watchdog timer, 2 event detects |
| X | Memory | 064 Bytes SRAM 1 = 1Kbit EE, 64 Bytes SRAM 2 = 2Kbit EE, 64 Bytes SRAM |
| X | ID/MAC Address | 0Blank 1 = EUI-48 MAC address 2 = EUI-64 MAC address |
| X | Packaging | Blank = Tube T = Tape and reel |
| X | Temperature Range | I = -40°C to 85°C |
| XX | Package Type | SN = 8-Lead Plastic Small Outline (3.90 mm body) ST = 8-Lead Plastic Thin Shrink Small Outline (4.4 mm) MS = 8-Lead Plastic Micro Small Outline MNY = 8-Lead Plastic Dual Flat, No Lead SL = 14-Pin SOIC ST = 14-Pin TSSOP |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector |
| BeeHive204AP | adapter/module: Note: via ISP connector |
| BeeHive208S | adapter/module: Note: via ISP connector |
| BeeProg2 | adapter/module: Note: via ISP connector |
| BeeProg2AP | adapter/module: Note: via ISP connector |
| BeeProg2C | adapter/module: Note: via ISP connector |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector |
| SmartProg2 (discontinued) | adapter/module: Note: via ISP connector |
