Home » Device: PIC24FJ128GA310 (ISP-ext.VDD) Device: PIC24FJ128GA310 (ISP-ext.VDD) Manufacturer: Microchip Part number description for this device: PIC XX XX XXX XXX XX X - X / XX - XXX Move the cursor over the box to highlight particular section PIC Microchip Trademark XX Architecture 24 = 16-bit modified Harward without DSP XX Flash Memory Family FJ = Flash program memory XXX Program Memory Size 16 = 16kB32 = 32kB48 = 48kB64 = 64kB96 = 96kB128 = 128kB256 = 256kB512 = 512kB XXX Product Group GA0, GA1 = General purpose microcontrollersGB0, GB1, GB2 = General purpose microcontrollers with USB On-The-GoDA2 = General purpose microcontrollers with Graphics Controllerand USB On-The-GoMC1 = Motor control family XX Pin Count 01 = 18-pins or 20-pins02 = 28-pins04 = 44-pins05 = 48-pins06 = 64-pins08 = 80-pins10 = 100-pins(TQFP)/121-pins(BGA) X Tape and Reel Flag(if applicable) X Temperature Range I = Industrial (-40°C to 85°C)E = Extended (-40°C to 125°C) / XX Package Type P = PDIPTL = 36-pin TLAPT = 44-lead, 64-lead, 80-lead, 100-lead (12x12x1mm) TQFPY8 = (7x7mm) TQFPPF = 100-lead(14x14x1mm) TQFPSP = SPDIPSO = SOICSS = SSOPML = QFNMR = 64-lead (9x9x0.9 mm)QFNM6 = (4x4mm) UQFNPTX = (6x6mm) UQFN5E = (7x7mm) UQFNR4X = (9x9mm) VQFNBG = 121-pin BGAMV = 28-lead (4x4 mm) UQFNMA = 48-lead (6x6 mm) UQFN XXX Pattern - three-digit QTP, SQTP, code or specialrequirements (blank otherwise)ES = Engineering sample
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result page Supported by programmers and programming adapters/modules: BeeHive204 adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC BeeHive204AP adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC BeeHive208S adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC BeeProg2 adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC BeeProg2AP adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC BeeProg2C adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC SmartProg2 adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
go back to result page