Device: SST26VF064BA (ISP)
Manufacturer: Microchip
Part number description for this device:
Move the cursor over the box to highlight particular section| XXX | SST | |
| XX | Product Series | 25 = Serial peripheral interface flash memory 26 = Serial quad I/O (SQI) flash memory |
| XX | Voltage | LF = 3.0V to 3.6V PF = 2.3V to 3.6V VF = 2.7V to 3.6V WF = 1.65V to 1.95V |
| XXX | Device Density | 512 = 512Kbit 010 = 1Mbit 020 = 2Mbit 040 = 4Mbit 080 = 8Mbit 016 = 16Mbit 032 = 32Mbit 064 = 64Mbit |
| X | Version | A = A-version B = B-version C = C-version |
| XXX | Additional Features | Blank = default at power-up has the WP# and HOLD# pins enabled, and the SIO2 and SIO3 pins disabled, to initiate SPI-protocol operations A = default at power-up has the WP# and HOLD# pins disabled, and the SIO2 and SIO3 pins enabled, to initiate Quad I/O operations EUI = Factory-programmed with EUI-48™ and EUI-64™ Global Unique Identifier |
| X | Tape and Reel Flag | Blank = Tube or tray T = Tape and reel |
| XXX | Operating Frequency | 40 = 40MHz 104 = 104MHz |
| X | Temperature Range | I = -40°C to 85°C V = -40°C to 105°C E = -40°C to 125°C |
| / | ||
| XX | Package Type | MF = WDFN (6mm x 5mm Body), 8-lead MN = WDFN (6mm x 8mm Body), 8-lead SN = SOIC (3.90 mm Body), 8-lead SM = SOIJ (5.28 mm Body), 8-lead SO = SOIC (7.50 mm Body), 16-lead TD = TBGA (>1mm pitch, <1.2mm height, 6mm x 8 mm Body), 24-lead NP = USON (2mm x 3mm Body), 8-contact CS = Z-Scale (Chip Scale Package) 8-ball |
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result pageSupported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive204AP | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive208S | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2 | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2AP | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeProg2C | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
| BeeHive204AP-AU (discontinued) | adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC |
