Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: M29W640GSLxxNB [TSOP56]

Manufacturer: Micron

Part number description for this device:

Move the cursor over the box to highlight particular section
M    
XX Family Descriptor 28 = FLASH29 = Single Supply Flash memory29K = LightFlash50 = Flash memory for PC BIOS29D = Dual or Multiple Bank Flash
X Operating Voltage F = 5VW = 2.7V to 3.6VV = Low-voltageFLW = Firmware Hub/Low pin count interface, Vcc=2.7V to 3.6VLPW = Low pin count interface, Vcc=2.7V to 3.6V
XXX Density 004, 004B = 512kx8008, 008A = 1Mx8010B = 128kx8, Uniform block017D = 2Mx8, Uniform block022B = 256kx8040, 040B = 512kx8, Uniform block102B = 64kx16160B, 160D, 160E = 2Mx8 / 1Mx16200B = 256kx8 / 128kx16320D, 320E = 4Mx8 / 2Mx16400, 400B, 400D, 400F = 512kx8 / 256kx16512B = 64kx8640D, 640F, 640G, 064F = 8Mx8 / 4Mx16641D = 4Mx16, Uniform block800, 800A, 800D = 1Mx8 / 512kx16128F, 128G = 16Mx8 / 8Mx16, Uniform block256G = 32Mx8 / 16Mx16, Uniform block640GS = 64Mbit (x8/x16), boot block, uniform or boot block, secure flash memory
X Boot Block Architecture T = Top Boot BlockB = Bottom Boot BlockH = Protection on highest address blockL = Protection on lowest address block
XX Speed Option 55, 5A = 55 ns60 = 60 ns70, 7A = 70 ns80 = 80 ns90 = 90 ns100 = 100 ns120 = 120 ns
X Power Supplies Blank = Vcc +/-10\\\\%, Vpp +/-5\\\\%X = Vcc +/-5\\%, Vpp +/-5\\%Y = Vcc +/-10\%, Vpp +/-10\%
X Package Type P = Plastic DIPN, NA = TSOP40, TSOP48NB = TSOP56K = PLCCZA, ZB, ZF = TBGA, TFBGA, LFBGAZS = LBGA, FBGAM = PSOPB = Plastic DIP32C = PLCC32NZ = TSOP32
X Temperature Range 0, 1 = 0°C to 70°C3 = -40°C to 125°C5 = -20°C to 85°C6 = -40°C to 85°C
XX Option T, S = Tape & ReelR = Reverse pinoutBlank = Standard packingE = Lead-free package, Standard packingF = Lead-free package, Tape & Reel packing

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeHive204AP adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
BeeHive208S adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeHive304 adapter/module: AP3 TSOP56-18.4mm NOR-4 (73-3122)
BeeProg2 adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeProg2AP adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
BeeProg2C adapter/module: DIL48/TSOP56 ZIF 18.4mm NOR-4 (70-3077)
BeeProg3 adapter/module: AP3 TSOP56-18.4mm NOR-4 (73-3122)
BeeHive204AP-AU (discontinued) adapter/module: AP1 TSOP56 ZIF 18.4mm NOR-4 (71-1997)
go back to result page
🍪
Back to TOP