Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: NM93C56A (x8) (ISP)

Manufacturer: National Semicond.

Part number description for this device:

Move the cursor over the box to highlight particular section
AT Atmel  
XXX Family Descriptor 93C = 3-Wire Serial EEPROM
XXX Density 46 = 1kbit56 = 2kbit57 = 2kbit66 = 4kbit86 = 16kbit
X Version BlankABCDE
X Pinout BlankR = Rotated
XX Package Option BlankN = Narrow SOIC8 (150mil)W = Wide SOIC8 (208mil)Y1 = 8-lead, 4.90 mm x 3.00 mm Body, Dual Footprint, Non-leaded,Miniature Array Package (MAP)Y6 = 8-lead, 2.00 mm x 3.00 mm Body, 0.50 mm Pitch, Ultra Thin Mini-MAP,Dual No Lead package (DFN), (MLP 2x3 mm)U3 = 8-ball, die Ball Grid Array Package (dBGA2)D3 = 8-lead, 1.80 mm x 2.20 mm Body, Ultra Lead Frame Land Grid Array (ULA)
XX Speed Option Blank10 = 10 ms
X Package Type P = Plastic DIPS = SOICT = TSSOPD = ULAU = BGAY = MAP/MLP/DFN
X Device Grade/Temperature C = Std. paste containing Pb,Commercial Temperature range (0°C to 70°C)I = Std. paste containing Pb,Industrial Temperature range (-40°C to +85°C)H = Green, NiPdAu lead finish,Industrial Temperature range (-40°C to +85°C)U = Green, matte Sn lead finish,Industrial Temperature range (-40°C to +85°C)
XX Operating Voltage Blank = 4.5V to 5.5V2.7 = 2.7V to 5.5V2.5 = 2.5V to 5.5V1.8 = 1.8V to 5.5V

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Note: via ISP connector
BeeHive204AP adapter/module: Note: via ISP connector
BeeHive208S adapter/module: Note: via ISP connector
BeeProg2 adapter/module: Note: via ISP connector
BeeProg2AP adapter/module: Note: via ISP connector
BeeProg2C adapter/module: Note: via ISP connector
SmartProg2 adapter/module: Note: via ISP connector
BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page
🍪
Back to TOP