Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: M29F002NT

Manufacturer: STMicroelectronics

Part number description for this device:

Move the cursor over the box to highlight particular section
M    
XX Family Descriptor 28 = FLASH29 = Single Supply Flash memory29K = LightFlash50 = Flash memory for PC BIOS29D = Dual Bank Flash
X Operating Voltage F = 5VW = 2.7V to 3.6VV = Low-voltageFLW = Firmware Hub/Low pin count interface, Vcc=2.7 to 3.6VLPW = Low pin count interface, Vcc=2.7 to 3.6V
XXX Density 002B, 002T, 002NT, 002BNT = 256kx8010B = 128kx8, Uniform block016B, 016D = 2Mx8, Uniform block032D = 4Mx8, uniform block040, 040B = 512kx8, Uniform block080A, 080D = 1Mx8, Uniform block100, 100B = 128kx8 / 64kx16102, 102B = 64kx16160, 160B = 2Mx8 / 1Mx16200, 200B = 256kx8 / 128kx16400, 400B = 512kx8 / 256kx16512B = 64kx8800A, 800D = 1Mx8 / 512kx16
X Boot Block Architecture T = Top Boot BlockB = Bottom Boot Block
XX Speed Option 70 = 70 ns80 = 80 ns90 = 90 ns100 = 100 ns120 = 120 ns
X Power Supplies Blank = Vcc +/-10\\\\%, Vpp +/-5\\\\%X = Vcc +/-5\\%, Vpp +/-5\\%Y = Vcc +/-10\%, Vpp +/-10\%
X Package Type N = TSOP40, TSOP48P = Plastic DIPK = PLCCZB = TFBGAM = PSOPB = Plastic DIP32C = PLCC32NZ = TSOP32
X Temperature Range 0, 1 = 0°C to 70°C3 = -40°C to 125°C5 = -20°C to 85°C6 = -40°C to 85°C
XX Option T, S = Tape&ReelR = Reverse pinout

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 direct connection
BeeHive208S direct connection
BeeProg2 direct connection
BeeProg2C direct connection
SmartProg2 direct connection
MEMprog2 (discontinued) direct connection
go back to result page
🍪
Back to TOP