Programmers | Adapters | Elnec | Universal | Production | Device
show-menu
0 items | view cart Elnec online orders

Device: uPSD3434EB (ISP)

Manufacturer: STMicroelectronics

Part number description for this device:

Move the cursor over the box to highlight particular section
uPSD Device Type uPSD = Microcontroller PSD
XX Family 33 = Turbo Core34 = Turbo Plus core32 = 8032 Core, 16 Macrocells
X SRAM Size 1 = 2Kbyte2 = 4Kbytes3 = 8Kbytes5 = 32Kbytes
X Main Flash Memory Size 2 = 64Kbytes3 = 128Kbytes4 = 256Kbytes
X IP Mix A = USB, I2C, PWM, ADC, UARTs, SupervisorC = I2C, PWM, ADC, UARTs, SupervisorD = IP mix: I2C, SPI, UART, IrDA, ADC, Supervisor, PCAE = IP mix: USB, I2C, SPI, UART, IrDA, ADC, Supervisor, PCA
X Operating Voltage Blank = Vcc=3.0V to 3.6V, Vdd=4.5V to 5.5VV = Vcc=Vdd=3.0V to 3.6V
X Revision - = Revision AB = Revision B
XX Speed 24 = 24MHz40 = 40MHz
X Package Type T = 52-pin TQFPU = 80-pin TQFP
X Temperature Range 1 = 0°C to 70°C6 = -40°C to 85°C
X Shipping Option T = Tape&Reel packing

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Note: via ISP connector
BeeHive204AP adapter/module: Note: via ISP connector
BeeHive208S adapter/module: Note: via ISP connector
BeeProg2 adapter/module: Note: via ISP connector
BeeProg2AP adapter/module: Note: via ISP connector
BeeProg2C adapter/module: Note: via ISP connector
BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page
🍪
Back to TOP