Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: Am29DL162DB [TSOP48]

Manufacturer: Spansion

Part number description for this device:

Move the cursor over the box to highlight particular section
Am AMD Products  
XXXX Family Signature 29DL = 3V, Simuiltaneous Read/Write
XXX Density, Bus Width and Sector Organization 16x = 2Mx8 / 1Mx1632x = 4Mx8 / 2Mx16400 = 512kx8 / 256kx16640 = 8Mx8 / 4Mx16800 = 1Mx8 / 512kx16
X Process Technology B = 0.32 um technologyC = 0.32 um thin-film technologyD = 0.23 um thin-film technologyG = 0.17 um thin-film technologyH = 0.13 um thin-film technologyM = MirrorBit technology
XX Sector Architecture and Sector Write Protection U, Blank = Uniform sector deviceB = Bottom boot sectorT = Top boot sectorH = Uniform sector device, highest address sector protectedL = Uniform sector device, lowest address sector protectedJ40 = (Ultra NAND only) 100\% usable blocks
XXX Speed Option, Voltage regulation **(*) = 2 or 3 digits indicates speed in ns, device is full voltage range, Vcc=2.7V to 3.6V**(*)R = 2 or 3 digits indicate speed in ns, „R“ indicates regulated voltage range Vcc=3V to 3.6V
X Package Type P = Plastic DILJ = Plastic LCCS = SOPZ = SSOPE = TSOPE2 = TSOP IIF = Reverse TSOPF2 = Reverse TSOP II0.8mm ball pitch (unless otherwise noted) :MA = 63-ball FBGA (11x12mm)VA = 44-ball FBGA (9.2x8mm, 0.5mm pitch)VR = 48-ball, VFBGA (8.15x6.15mm)WA = 48-ball FBGA (6x8mm)WB = 48-ball, FBGA (6x9mm)WC = 48-ball, FBGA (8x9mm)WD = 63-ball, FBGA (8x14mm)WG = 40-ball, FBGA (8x15mm)WH = 63-ball, FBGA (12x11mm)WK = 47-ball, FBGA (7x10mm, 0.5mm pitch)WL = 48-ball, (11x10mm, 0.5mm pitch)WM = 48-ball, (6x12mm)WN = 84-ball, FBGA(11x12mm)1.0mm ball pitch (unless othervise noted) :PA = 64-ball, BGA (13x11mm, 1.7mm)PB = 80-ball, BGA (13x11mm)PC = 64-ball, BGA (13x11mm)PE = 80-ball, BGA(10x15mm)
X Temperature Range C = CommercialI = IndustrialE = Extended
X Optional Proccessing Blank = Standard ProccessingN = ESN devicesB = Burn-in

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Bottom TSOP48 NOR-1 (70-1227) Top TSOP48 ZIF 18.4mm (70-1228)
BeeHive204AP adapter/module: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988)
BeeHive208S adapter/module: Bottom TSOP48 NOR-1 (70-1227) Top TSOP48 ZIF 18.4mm (70-1228)
BeeProg2 adapter/module: Bottom TSOP48 NOR-1 (70-1227) Top TSOP48 ZIF 18.4mm (70-1228)
BeeProg2AP adapter/module: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988)
BeeProg2C adapter/module: Bottom TSOP48 NOR-1 (70-1227) Top TSOP48 ZIF 18.4mm (70-1228)
BeeHive204AP-AU (discontinued) adapter/module: AP1 TSOP48 ZIF 18.4mm NOR-1 (71-1988)
go back to result page
🍪
Back to TOP