Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: S25FL004D (ISP)

Manufacturer: Spansion

Part number description for this device:

Move the cursor over the box to highlight particular section
S Spansion  
XXXX Device Family 25FL = SpansionTM Memory 3.0 Volt-only, Serial PeripheralInterface (SPI) Flash Memory
XXX Density 004, 040 = 4Mbit008 = 8Mbit016 = 16Mbit032 = 32Mbit064 = 64Mbit
X Device Technology A = 0.20 µm MirrorBit™ Process Technology
XX Speed 0L = 50MHz
X Package Type V = 8-Pin Plastic Small Outline Package (150mil)M = SOIC-16, SOIC-8 (208mil)(for S25FL008A, S25FL040A)N = 8-Contact USON Package, 8-Contact WSON Package
X Package Materials A = Standard platingF = Lead (Pb)-free
X Temperature Range I = Industrial (-40°C to 85°C)
XX Model Number (Additional Ordering Options) 00 = 64 KBytes Uniform sector01 = Top boot sector02 = Bottom boot sector
X Packing Type 0Tray1 = Tube3 = 13\'\' Tape & Reel

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Note: via ISP connector
BeeHive204AP adapter/module: Note: via ISP connector
BeeHive208S adapter/module: Note: via ISP connector
BeeProg2 adapter/module: Note: via ISP connector
BeeProg2AP adapter/module: Note: via ISP connector
BeeProg2C adapter/module: Note: via ISP connector
SmartProg2 adapter/module: Note: via ISP connector
BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page
🍪
Back to TOP