Home » Device: S25FL040Axxxxx02 (ISP) Device: S25FL040Axxxxx02 (ISP) Manufacturer: Spansion Part number description for this device: S XXXX XXX X XX X X X XX X Move the cursor over the box to highlight particular section S Spansion XXXX Device Family 25FL = SpansionTM Memory 3.0 Volt-only, Serial PeripheralInterface (SPI) Flash Memory XXX Density 004, 040 = 4Mbit008 = 8Mbit016 = 16Mbit032 = 32Mbit064 = 64Mbit X Device Technology A = 0.20 µm MirrorBit™ Process Technology XX Speed 0L = 50MHz X Package Type V = 8-Pin Plastic Small Outline Package (150mil)M = SOIC-16, SOIC-8 (208mil)(for S25FL008A, S25FL040A)N = 8-Contact USON Package, 8-Contact WSON Package X Package Materials A = Standard platingF = Lead (Pb)-free X Temperature Range I = Industrial (-40°C to 85°C) XX Model Number (Additional Ordering Options) 00 = 64 KBytes Uniform sector01 = Top boot sector02 = Bottom boot sector X Packing Type 0Tray1 = Tube3 = 13\'\' Tape & Reel
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result page Supported by programmers and programming adapters/modules: BeeHive204 adapter/module: Note: via ISP connector BeeHive204AP adapter/module: Note: via ISP connector BeeHive208S adapter/module: Note: via ISP connector BeeProg2 adapter/module: Note: via ISP connector BeeProg2AP adapter/module: Note: via ISP connector BeeProg2C adapter/module: Note: via ISP connector SmartProg2 adapter/module: Note: via ISP connector BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page