Device: S34ML16G202Txx20 [TSOP48]
Manufacturer: Spansion
Device type: NAND Flash
Part number description: |
SXXXX XXX X XX X X X XX X |
| Move the cursor over the box to highlight particular section |
| SXXXX | Device Family | S19MN = MirrorBit™ Quad Flash FamilyS30ML = 3.0V NAND Interface Flash MemoryS30MS = 1.8V NAND Interface Flash MemoryS34ML = 3.0V SLC NAND Flash Memory for EmbededS34MS = 1.8V SLC NAND Flash Memory for EmbededS34SL = 3.0V SLC SecureNAND Flash Memory for Embeded |
| XXX | Density | 128 = 128Mbit256 = 256Mbit512 = 512Mbit01G = 1Gbit02G = 2Gbit04G = 4Gbit08G = 8Gbit16G = 16Gbit |
| X | Technology | P = 90nm MirrorBit™ TechnologyR = 65nm MirrorBit™ Technology1 = Spansion NAND Revision (4x nm)2 = Spansion NAND Revision (32 nm)3 = Cypress NAND Revision 3 (16nm) |
| XX | Speed/Bus Width | 25 = 25ns read cycle30 = 30ns read cycle50 = 50ns read cycleFor S34ML/S34MS/S34SL:00 = x8 NAND, single die01 = x8 NAND, dual die, 1CE02 = x8 NAND, quad die, 1CE03 = x8 NAND, quad die, 2CE04 = x16 NAND, single die05 = x16 NAND, dual die |
| X | Package Type | T = 48-pin TSOPB = 63-ball BGAG = 67-ball BGA |
| X | Materials Set | F = Pb-freeH = Low Halogen |
| X | Temperature Range | I = Industrial (-40°C to +85°C)A = Industrial with AECQ-100 and GT grade (-40°C to 85°C)V = Industrial Plus (-40°C to 105°C)B = Industrial Plus with AECQ-100 and GT grade (-40°C to 105°C)P = -25°C to +70°CW = Wireless (-25°C to +85°C)E = Engineering Samples |
| XX | Model Number | For S19MN:00 = x801 = x16For S30ML:00 = x8, no Vio, ECC-free01 = x16, no Vio, ECC-free02 = x8, with Vio, ECC-free03 = x16, with Vio, ECC-free50 = x8, no Vio, ECC-required51 = x16, no Vio, ECC-required52 = x8, with Vio, ECC-required53 = x16, with Vio, ECC-requiredFor S30MSxxxP:00 = x8, ECC-free01 = x16, ECC-free50 = x8, ECC-required with Boot Block51 = x16, ECC-required with Boot BlockFor S30MSxxxR:00 = x8, ECC-free, None Bad Blocks10 = x8, ECC-free, Up to 2% Initial Bad Blocks,None Bad Blocks During Life20 = x8, ECC-required, Maximum 2% BadBlocks Over Lifetime01 = x16, ECC-free, None Bad Blocks11 = x16, ECC-free, Up to 2% Initial Bad Blocks,None Bad Blocks During Life21 = x16, ECC-required, Maximum 2% BadBlocks Over LifetimeFor S34ML/S34MS/S34SL:00 = Standard Interface / ONFI (x8) - 2kB00 = Standard Interface (x16)01 = ONFI (x16) |
| X | Packing Type | 0Tray2 = 7'' Tape and Reel3 = 13'' Tape and Reel |
Supported by programmers and programming adapters/modules:
| BeeHive204 | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeHive204AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
| BeeHive208S | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeHive304 | adapter/module: AP3 TSOP48-18.4mm NAND (73-2948) |
| BeeProg2 | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeProg2AP | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
| BeeProg2C | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
| BeeProg3 | adapter/module: AP3 TSOP48-18.4mm NAND (73-2948) |
| BeeHive204AP-AU (discontinued) | adapter/module: AP1 TSOP48 ZIF 18.4mm NAND-3 (71-3097) |
| BeeProg+ (discontinued) | adapter/module: DIL48/TSOP48 ZIF 18.4mm NAND-3 (70-3081) |
