Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: XCR3512XL [FTBGA256](Jam)

Manufacturer: Xilinx

Part number description for this device:

Move the cursor over the box to highlight particular section
XCR    
XXXXXX Device Number 3032XL = 32 Macrocells3064XL = 64 Macrocells3128XL = 128 Macrocells3256XL = 256 Macrocells3384XL = 384 Macrocells3512XL = 512 Macrocells
XX Speed Option 5 = 5.0 ns pin-to-pin delay6 = 6.0 ns pin-to-pin delay7 = 7.5 ns pin-to-pin delay10 = 10 ns pin-to-pin delay12 = 12 ns pinto-pin delay
XX Package Type PC = PLCCVQ = VQFPCS, CP = CS BGAPQ = PQFPFT = FTBGAFG = FBGA
XXX Number of Pins  
X Temperature Range C = CommercialI = Industrial

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: BGA-0528/0453A (70-0528/0453A) = BGA-Bottom-44 (70-0528) + BGA-Top-44 ZIF (a) (70-0453A)
BeeHive204AP adapter/module: AP1 BGA-0528/0453 (71-2108)
BeeHive208S adapter/module: BGA-0528/0453A (70-0528/0453A) = BGA-Bottom-44 (70-0528) + BGA-Top-44 ZIF (a) (70-0453A)
BeeHive304 adapter/module: AP3 BGA256-3 PLD-4 (73-3868)
BeeProg2 adapter/module: BGA-0528/0453A (70-0528/0453A) = BGA-Bottom-44 (70-0528) + BGA-Top-44 ZIF (a) (70-0453A)
BeeProg2AP adapter/module: AP1 BGA-0528/0453 (71-2108)
BeeProg2C adapter/module: BGA-0528/0453A (70-0528/0453A) = BGA-Bottom-44 (70-0528) + BGA-Top-44 ZIF (a) (70-0453A)
BeeProg3 adapter/module: AP3 BGA256-3 PLD-4 (73-3868)
BeeHive204AP-AU (discontinued) adapter/module: AP1 BGA-0528/0453 (71-2108)
go back to result page
🍪
Back to TOP