Home » Device: MT25QU01GBBB8E [SO16W] (Quad I/O) Device: MT25QU01GBBB8E [SO16W] (Quad I/O) Manufacturer: Micron Part number description for this device: MT XXX X XXX X X X X X XX - X X XX XX Move the cursor over the box to highlight particular section MT Micron Technology XXX Part Family 25Q = SPI NOR X Voltage U = 1.7V to 2.0VL = 2.7V to 3.6V XXX Density 064 = 64Mb (8MB)128 = 128Mb (16MB)256 = 256Mb (32MB)512 = 512Mb (64MB)01G = 1Gb (128MB)02G = 2Gb (256MB) X Stack A = 1 die / 1 S#B = 2 die /1 S#C = 4 die / 1 S# X Litho B = 45nm X Die Revision A = Rev. AB = Rev. B X Pin Configuration Option 1 = HOLD# pin3 = RESET# pin8 = RESET# & HOLD# pin X Sector Size E = 64KB sectors, 4KB and 32KB sub-sectors XX Packge Codes 12 = 24-ball T-PBGA, 05/6 x 8mm (5 x 5 array)14 = 24-ball T-PBGA, 05/6 x 8mm (6 x 4 array)SC = 8-pin SOP2, 150 milSE = 8-pin SOP2, 208 milSF = 16-pin SOP2, 300 milW7 = 8-pin W-PDFN, 6 x 5mm (MLP8 6mm x 5mm)W8, W9 = 8-pin W-PDFN, 8 x 6mm (MLP8 8mm x 6mm)5x = WLCSP package X Security Features 0Standard default security1 = Security X Special Options S = StandardA = Automotive quality XX Operating Temperature IT = –40°C to +85°CAT = –40°C to +105°C (Grade 2 AEC-Q100)UT = -40°C to 125°C XX Production Status Blank = ProductionES = Engineering samplesQS = Qualification samples
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result page Supported by programmers and programming adapters/modules: go back to result page