BeeProg2

 
For the proper functioning of this website we recommend to turn on JavaScript.
 

  • 71-1726

    Price: US $308.00 [read this!][read this!])
    Price 4-7: US $283.40
    Price 8+ : Ask for price [?]

      View cart

  • specialized programming module for Renesas (Hitachi) HD64F3607x, HD64F368x devices in QFP64 package
  • operating (mechanical) life of ZIF socket – 10,000 actuations
  • supported from PG4UW software version 3.07m
  • made in Slovakia
Ord. no. 71-1726
Socket ZIF QFP64, OpenTop type
Bottom 2 female connectors by 32 pins, DIN41612 B/2
Class Specialized
Subclass Mitsubishi/Renesas MCU
Availability in stock 42This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days. pcs. within 3 days
Module manual
  • Protect the contacts of module connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
  • Proceed with care! Incorrect insertion of device in module ZIF socket may lead to programmed device damage.

  • Unscrew 2 knurled thumb screws. Insert programming module into Programming Module Interface connectors, until it clicks. Due to connectors shape, only one orientation and position of programming module in Programming Module Interface connectors is possible. Screw 2 knurled thumb screws to fix programming module to programmer.
  • Push the cover of module ZIF socket (the topmost movable part) to open the socket. Insert the device into module ZIF socket. Correct position of programmed device in module ZIF socket is indicated by picture near (usually on left above) the module ZIF socket. On that picture, reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned. Then release module ZIF socket.
  • The cover must be fully actuated (depressed) before inserting a device into the socket. If device is inserted into only partially opened ZIF socket, then - after releasing of cover – device pins might be damaged.
  • Visually check the placement of programmed device in module ZIF socket. If everything looks OK, the device is ready for programming.
  • To take out the device from module, push the cover of module ZIF socket and remove the device.
  • When you finish the work with module, unscrew 2 knurled thumb screws and remove the module from Programming Module Interface connectors.

  • Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing

Software note
  • If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
 
Accepted package(s)
QFP64 Package
Design

Usable for programmer(s):
BeeHive204AP BeeHive204AP-AU BeeProg2AP



This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.