BeeProg+

 
 

DIL48/QFP80 ZIF SAMS-1
(Ord. no. 70-2668)

See: Adapter manual | Accepted package(s) | Useable for programmer(s)
Price: US $308.00 [read this!]
Price 4-7: US $283.40
Price 8+ : Ask for price [?]
  • special adapter, assigned for SAMSUNG S3P8245XZZ in QFP80 package
  • operation (mechanical) life of ZIF socket - 10.000 actuations
  • made in Slovakia
Ord. no. 70-2668
Socket ZIF QFP80, open top type
Bottom 2x24 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Specialized
Subclass other
Availability in stock 0 [12]
Adapter manual
  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. On this picture reference corner (e.g. position of pin 1) of device is indicated by dot, by number 1, by bevelled corner or by any combination of them. Then release adapter ZIF socket.
  • Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
  • To take out the device push the top of adapter ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.

Software note
  • If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.
 
Accepted package(s)
QFP80 Package
Design