Device Search tip
The names of the programmable devices in our database don't contain all characters, shown at the top of the chip or mentioned in a datasheet section part numbering. The names of the chips in our database contain all characters necessary for identification of the device, but don't contain such codes, that have no influence to the programming, for example temperature code, speed code, packing type code, etc. . If such code letter is at the end of the name, it should be omitted (Ex. 1). If such code letter is in the middle of the name, it should be replaced by character 'x' (Ex. 2).
devices Am27C512-150, Am27C512-200 and Am27C512-250 should be searched as Am27C512
device S29GL064N11TF1010 should be searched as S29GL064NxxTxx01
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
The sample of programmable devices is necessary to have for test and release new
In case of missed samples, we always asking the semiconductor manufacturer
for samples, but if samples are not available - also in the package you're
asking for the support - the solution from us will be delayed.
The real chips are also necessary to have in the case of reproducing issues
from the created support. Therefore we can return your samples only if we
get chips from semiconductor manufacturer.
Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. On this picture reference corner (e.g. position of pin 1) of device is indicated by dot, by number 1, by bevelled corner or by any combination of them. Then release adapter ZIF socket.
Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
To take out the device push the top of adapter ZIF socket and remove device from it.
When you finish work with adapter, remove it from the device programmer ZIF socket.
Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.
If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.