Device Search tip
The names of the programmable devices in our database don't contain all characters, shown at the top of the chip or mentioned in a datasheet section part numbering. The names of the chips in our database contain all characters necessary for identification of the device, but don't contain such codes, that have no influence to the programming, for example temperature code, speed code, packing type code, etc. . If such code letter is at the end of the name, it should be omitted (Ex. 1). If such code letter is in the middle of the name, it should be replaced by character 'x' (Ex. 2).
devices Am27C512-150, Am27C512-200 and Am27C512-250 should be searched as Am27C512
device S29GL064N11TF1010 should be searched as S29GL064NxxTxx01
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
The sample of programmable devices is necessary to have for test and release new
In case of missed samples, we always asking the semiconductor manufacturer
for samples, but if samples are not available - also in the package you're
asking for the support - the solution from us will be delayed.
The real chips are also necessary to have in the case of reproducing issues
from the created support. Therefore we can return your samples only if we
get chips from semiconductor manufacturer.
15 pcs. [other 74 pcs.
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days. within 3 days]
Insert adapter to the device programmer ZIF socket according to the picture placed nearby. If you have any doubts about orientation of adapter in device programmer ZIF socket, there is general rule valid - the orientation of the text of adapter title is the same as orientaion of the text on the top of the device programmer.
Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of programmed device in adapter ZIF socket is show at picture near the adapter ZIF socket (commonly in above left). The reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bezel or by any combination of previous. Then release the top of adapter ZIF socket.
Check the interconnections between device and adapter ZIF socket visually. If everything is OK, the device is ready for programming.
Be careful - incorrect adapter insertion in the device programmer ZIF socket or device insertion in the adapter ZIF socket can cause the damage the programmed device.
To take out the device push the top of adapter ZIF socket and pick the device out
When you have finished working with adapter, remove it from the device programmer ZIF socket.
Do not touch the pins of the adapter and/or adapter ZIF socket directly by hand. Dirty particles may cause errors during programming of the device.
We recommend to use a vacuum pick up tool for device handling.
If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.