Discontinued product! Please go to discontinued products section to find the replacement.
universal module, assigned for devices in PLCC44
operating (mechanical) warranty of ZIF socket - 10,000 actuations (We"re sorry, but we"re not able to provide warranty of reliable contact over the mechanical lifetime of ZIF socket - please read note below)
NOTE: This programming module was manufactured on the pressure of some customer, but we don"t recommend to use it for programming. Reason: the quality of this PLCC ZIF socket is not sufficient for manufacturing purposes, but this model of ZIF socket is only one open-top type of PLCC we know (exist on the market). For programming of devices in PLCC packages, we recommend to use manual programming and programming adapters with ClamShell type of ZIF socket.
Unscrew 2 knurled thumb screws. Properly insert programming module to the Programming Module Interface. Due to connectors shape, only one orientation and position programming module in Programming Module Interface is possible. Screw 2 knurled thumb screws to fix programming module to programmer.
Push the top of programming module ZIF socket to open it. Insert the device into them. The right position of the programmed device in programming module ZIF socket is show at picture near (mainly left above) the programming module ZIF socket. Then release programming module ZIF socket.
Pull a lid (the upper - moving - part of ZIF) of programming module a bit up to gain reliable contact.
Visually check interconnection between device and programming module ZIF socket. If everything looks OK, the device is ready for programming.
Be careful, because the incorrect insertion of programming module to the Programming Module Interface or device to the programming module ZIF socket can damage the programmed device.
To take out the device push the top of programming module ZIF socket and remove device from it.
When you finish work with programming module, remove it from the Programming Module Interface.
Do not directly touch the pins of Programming Module Interface and programming module ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
Software note
If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
Note: This programming adapter / module may not support all devices in the package(s) mentioned above on your programmer. Please, verify situation for particular device(s) you are going to work with using actual Device list of your programmer.
