Programming Modules for BeeProg2AP and BeeHive204AP programmers
Programming modules identification:
AP1 YYYY ZIF AAAA (ZZ)- AP1- type of module: AP1 = module for BeeHive204AP/BeeProg2AP programmers
- YYYY- package of programmed device identification: type of the ZIF socket and number of pins on device side
- ZIF- ZIF - Zero Insertion Force socket (might be omitted)
- AAAA- (optional) additional identification (size, purpose) of the module
- (ZZ)- (optional) orientation of the ZIF socket on the programmed module related to the reference point of programmed device
- if missing, then default orientation of reference point of programmed device is Left Up
- (LD) - reference point of package is Left Down
- (RD) - reference point of package is Right Down
- (RU) - reference point of package is Right Up
Example: AP1 TSOP56 ZIF 18.4mm NOR-4
Please, look also at related terms to programming modules.
Related terms to programming modules.
actuation | For Open-Top type of ZIF socket: push the socket to open position and release (with or without the chip inside) |
---|---|
mil | Length unit, 1/1000 of inch = 0.0254mm |
universal module | Module used for more types of programmable devices, e.g. AP1 SOIC8 ZIF 200mil for Serial EEPROMs, PICmicro, etc. in SOIC8 200mil |
body width | Width of SOIC/PSOP/TSOP/TSSOP package body, measured pins-side to opposite pins-side |