Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders
  • top board of BGA adapters
  • used ZIF socket may accept one or more variants of supported package, different in ball diameter, ball high and/or body thickness, see section Accepted package(s)
  • operating (mechanical) warranty of ZIF socket - 500,000 actuations
  • supported from PG4UW software version 3.18h
  • made in Slovakia
Ord. no. 70-2816
Socket ZIF BGA90, ClamShell type
Bottom 4x25 pins, square, 0.6x0.6mm
Class BGA
Subclass BGA-Top
Availability in stock
0 pcs.

We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.

70-2816 Move the cursor over the picture for additional view.

Ask for price

Adapter manual

  • Protect the contacts of adapter connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
  • Usage of vacuum pick-up tool is expected for device handling.
  • Proceed with care! Incorrect insertion of adapter in programmer ZIF socket or device in adapter ZIF socket may lead to programmed device damage.
  • For work with BGA device it is necessary put together BGA-Top-X with some BGA-Bottom-X board according to the information provided by PG4UW software for each particular device (menu Device/ Device info).
  • The picture shows, how to put together the BGA-Top-X and BGA-Bottom-X board to have complete BGA adapter.
  • Insert complete adapter into programmer ZIF socket. If you are in doubts about orientation of the adapter in programmer ZIF socket, there is a rule of thumb - orientation of adapter name text is the same as orientation of the text on the top of programmer.
  • Visually check the placement of adapter in programmer ZIF socket.
  • Release the pawl on adapter ZIF socket to open it. The socket cap will open by spring force. Insert the device into adapter ZIF socket. For correct device orientation, follow the instructions shown on picture in PG4UW software Device info window for device being programmed.
  • Visually check the placement of programmed device in adapter ZIF socket. If it looks OK, close adapter ZIF socket cap by hand and secure the pawl.
  • To take out the device from adapter, release the pawl on adapter ZIF socket and remove the device.
  • When you finish the work with adapter, remove it from programmer ZIF socket.
  • Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing.

Software note

  • If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
 

Accepted package(s)

BGA package Package
Design
NAMESYMBOLMINNOMMAX
ProfileA0.520.570.62
Ball HeightA10.1650.190.215
Body ThicknessA20.350.380.41
Ball Diameterb0.240.270.3
Body SizeD4.1784.2184.258
Body SizeE3.9643.9694.004
Ball Pitche-0.4-
Ball Array DGD-10-
Ball Array EGE-9-

Usable for programmer(s):

BeeHive208S BeeHive204 BeeProg2 BeeProg2C
🍪
Back to TOP