Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders
  • universal adapter for devices in QFN20/MLP20 package (e.g. Cygnal C8051 series, Atmel ATtiny series, Microchip PIC 16xxx series)
  • operating (mechanical) warranty of ZIF socket - 10,000 actuations
  • supported from PG4UW software version 3.09
  • made in Slovakia
Ord. no. 70-3262
Socket ZIF QFN20, OpenTop type
Bottom 2x20 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Universal
Subclass DIL/QFN (MLF)
Availability in stock
12 pcs.
[
other 15 pcs.

This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.

within 3 working days ]
70-3262

Price: US $224.00 [read this!]

Price 2-3: US $212.80

Price 4-7: US $206.10

Price 8+ : Ask for price [?]

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

    1. fixed discount when buying 4+ adapters of particular type,

    2. individual discount for quantities 8+ according to type of adapter and        demanded quantity. To get Quotation 8+ please click here: Ask for price

We are sorry but your territory is covered by our sole distributor. Contact please the distributor for your country - listed in our web site.

View cart

Adapter manual

  • Protect the contacts of adapter connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
  • Usage of vacuum pick-up tool is expected for device handling.
  • Proceed with care! Incorrect insertion of adapter in programmer ZIF socket or device in adapter ZIF socket may lead to programmed device damage.
  • Insert adapter into programmer ZIF socket. If you are in doubts about orientation of the adapter in programmer ZIF socket, there is a rule of thumb - orientation of adapter name text is the same as orientation of the text on the top of programmer.
  • Visually check the placement of adapter in programmer ZIF socket.
  • Push the cover of adapter ZIF socket (the topmost movable part) to open the socket. Insert the device into adapter ZIF socket. Correct position of programmed device in adapter ZIF socket is indicated by picture near (usually on left above) the adapter ZIF socket. On that picture, reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned. Then release adapter ZIF socket.
  • The cover must be fully actuated (depressed) before inserting a device into the socket.
  • Do not press on device while inserting it and/or releasing the cover.
  • Visually check the placement of programmed device in adapter ZIF socket. If everything looks OK, the device is ready for programming.
  • To take out the device from adapter, push the cover of adapter ZIF socket and remove the device.
  • When you finish the work with adapter, remove it from programmer ZIF socket.
  • Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing.

Software note

  • If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
 

Accepted package(s)

QFN20 Package
Design

Usable for programmer(s):

BeeHive208S BeeHive204 BeeProg2 BeeProg2C SmartProg2

Note: This programming adapter / module may not support all devices in the package(s) mentioned above on your programmer. Please, verify situation for particular device(s) you are going to work with using actual Device list of your programmer.

🍪
Back to TOP