BeeProg2

 
For the proper functioning of this website we recommend to turn on JavaScript.
 

  • 70-0310
    Move the cursor over the picture for additional view.

    Price: US $224.00 [read this!][read this!])
    Price 4-7: US $206.10
    Price 8+ : Ask for price [?]

      View cart

  • universal adapter, assigned for devices in QFN28/MLP28 package (for example Cygnal C8051Fxxx series, Silicon Laborat. C8051Fxxx series, Zilog Z8Fxxxx series)
  • operating (mechanical) life of ZIF socket - 5,000 actuations
  • made in Slovakia
Ord. no. 70-0310
Socket ZIF QFN28, ClamShell type
Bottom 2 rows, 2x 14 pins, square, 0.6x0.6mm, rows spacing 300mil
Class Universal
Subclass DIL/QFN (MLF)
Availability in stock 4 pcs. [other 8 pcs. This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days. within 3 days]
Adapter manual
  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Open the adapter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. On this picture reference corner (e.g. position of pin 1) of device is indicated by dot, by number 1, by bevelled corner or by any combination of them.
  • Visually check interconnection between device and adapter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ClamShell ZIF socket can damage the programmed device.
  • To take out the device, open adapter ClamShell ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.
  • If programming yields isn't 100% when using programming adapter or if some unreliability appears, try to connect one 22nF-100nF multilayer capacitor (that meet the EIA X7R or Z5U specification) between leads of adapter connected to pins VCC and GND pins of programmed chip.

Software note
  • If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.
 
Accepted package(s)
QFN28 Package
Design

Usable for programmer(s):
BeeHive208S BeeHive204 BeeProg2 BeeProg2C SmartProg2 BeeProg+ BeeHive8S BeeHive4+
BeeHive4 BeeProg



This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.