We are sorry but your territory is covered by our sole distributor. Contact please the
distributor for your country - listed in our web site.
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:
- fixed discount when buying 4+ adapters of particular type,
- individual discount for quantities 8+ according to type of adapter and demanded quantity. To get Quotation 8+ please click here: Ask for price
- special adapter, assigned for Atmel/Microchip AVR family in QFP32 package
- operating (mechanical) warranty of ZIF socket - 10,000 actuations
- made in Slovakia
|
| Ord. no. | 70-0687 |
| Socket | ZIF QFP32, OpenTop type |
| Bottom | 2 rows, 2x 14 pins, square, 0.6x0.6mm, rows spacing 600mil |
| Class | Specialized |
| Subclass | Atmel/Microchip AVR |
| Availability in stock | 0 We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.pcs. [other 127 pcs.
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days. within 3 working days] |
Wiring is:
|
| QFP |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
| DIL |
5 |
6 |
J5 |
7 |
8 |
J4 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
| QFP |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
32 |
| DIL |
19 |
20 |
NC |
21 |
22 |
NC |
23 |
24 |
25 |
26 |
27 |
28 |
1 |
2 |
3 |
4 |
|
Adapter manual
- Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
- Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. On this picture reference corner (e.g. position of pin 1) of device is indicated by dot, by number 1, by bevelled corner or by any combination of them. Then release adapter ZIF socket.
- Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
- Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
- To take out the device push the top of adapter ZIF socket and remove device from it.
- When you finish work with adapter, remove it from the device programmer ZIF socket.
- Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
- For handling with the device we recommended to use a vacuum pick up tool.
- Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.
- Connection table:
- J4 – pin 6 connect through jumper to pin 4 of QFP32
- J5 – pin 3 connect through jumper to pin 5 of QFP32
- NC - not connected
Software note
- If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.
Accepted package(s)
|
QFP32 |
 |
 |
Usable for programmer(s):
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.
