BeeProg2

 
For the proper functioning of this website we recommend to turn on JavaScript.
 

DIL34W/SSOP34 ZIF 200mil
(Ord. no. 70-0945)

See: Adapter manual | Accepted package(s) | Usable for programmer(s) | List of supported devices

WARNING: DIL34W/SSOP34 ZIF 200mil [70-0945] is discontinued product! Please go to discontinued products section to find the replacement.

  • 70-0945

  • universal adapter, assigned for SSOP devices up to 34 pins (e.g. Atmel AVR - 20Y package, Microchip PICmicro 16Cxxx, Scenix SXxxx)
  • operating (mechanical) life of ZIF socket - 10,000 actuations
  • made in Slovakia
Ord. no. 70-0945
Socket ZIF SSOP34, OpenTop type
Bottom 2x17 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Universal
Subclass DIL/(T)SSOP
Adapter manual
  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. Then release adapter ZIF socket.
  • Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
  • To take out the device push the top of adapter ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.
  • If programming yields isn't 100% when using programming adapter or if some unreliability appears, try to connect one 22nF-100nF multilayer capacitor (that meet the EIA X7R or Z5U specification) between leads of adapter connected to pins VCC and GND pins of programmed chip.

Software note
  • If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.
 
Accepted package(s)
SSOP20 Package
Design
SSOP24 Package
Design
SSOP28 Package
Design
SSOP34 Package
Design




This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.