BeeProg2

 
For the proper functioning of this website we recommend to turn on JavaScript.
 

DIL40/PLCC44 ZIF W-EPROM / MCS51
(Ord. no. 70-0067)

See: Adapter manual | Accepted package(s) | Usable for programmer(s) | List of supported devices
  • 70-0067
    Price: US $100.00 [read this!]
    Price 4-7: US $92.00
    Price 8+ : Ask for price [?]

      View cart

  • special adapter, assigned for microcontrollers '51 family and 16-bit EPROMs
  • operating (mechanical) warranty of ZIF socket - 10,000 actuations
  • made in Slovakia
Ord. no. 70-0067
Socket ZIF PLCC44, OpenTop type
Bottom 2 rows, 2x 20 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Specialized
Subclass MCS-51
Availability in stock 2 pcs. [other 13 pcs. This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days. within 3 working days]
Wiring is:
For W-EPROM
PLCC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
DIL NC 1 2 3 4 5 6 7 8 9 10 11 NC 12 13 14 15 16 17 18 19 20
PLCC 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
DIL NC 21 22 23 24 25 26 27 28 29 NC 30 31 32 33 34 35 36 37 38 39 40
For MCS51
PLCC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
DIL NC 1 2 3 4 5 6 7 8 9 10 NC 11 12 13 14 15 16 17 18 19 20
PLCC 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
DIL NC 21 22 23 24 25 26 27 28 29 30 NC 31 32 33 34 35 36 37 38 39 40
Adapter manual
  • Set jumpers to correct position - to uP51 for MCS51 or to EPR for EPROM.
  • NC pins are 1,12,23,34 for MCS51 or 1,13,23,33 for EPROM. If it is necessary, connect NC pins 1, 23, 24 to GND and 12 to VCC.
  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. Then release adapter ZIF socket.
  • Pull a lid (the upper - moving - part of ZIF) of programming adapter a bit up to gain more reliable contact
  • Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
  • To take out the device push the top of adapter ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.

Software note
  • If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.
 
Accepted package(s)
PLCC44 Package
Design

Usable for programmer(s):
BeeHive208S BeeHive204 BeeProg2 SmartProg2

This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.