specialized adapter for NAND flash devices in package BGA130 9x8mm, pitch 0.65mm, matrix 13x10
designed for TurboMode
used ZIF socket accepts many variants of supported package, different in ball diameter, ball high and/or body thickness, see section Accepted package(s)
operating (mechanical) warranty of ZIF socket – 10,000 actuations
supported from PG4UW software version 3.11c, s/n from 3176-00063 are supported from PG4UW software version 3.76
We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.
[
other 1 pcs.
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:
1. fixed discount when buying 4+ adapters of particular type,
2. individual discount for quantities 8+ according to type of adapter and demanded quantity. To get Quotation 8+ please click here:
Ask for price
We are sorry but your territory is covered by our sole distributor. Contact please the distributor for your country - listed in our web site.
Adapter manual
Protect the contacts of adapter connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
Proceed with care! Incorrect insertion of adapter in programmer ZIF socket or device in adapter ZIF socket may lead to programmed device damage.
Insert adapter into programmer ZIF socket. If you are in doubts about orientation of the adapter in programmer ZIF socket, there is a rule of thumb - orientation of adapter name text is the same as orientation of the text on the top of programmer.
Visually check the placement of adapter in programmer ZIF socket.
Push the cover of adapter ZIF socket (the topmost movable part) to open the socket. Once fully actuated, drop the device into the socket from a height of 2 to 3mm above the seating plane. For correct device orientation, follow the instructions shown on picture in PG4UW software Device info window for device being programmed. Then release adapter ZIF socket.
The cover must be fully actuated (depressed) before inserting a device into the socket.
Do not press on device while inserting it and/or releasing the cover.
Check this brochure for details on proper insertion procedure of chip/device into this ZIF socket.
Check brochure - https://www.elnec.com/sw/3m_tweezer_handling.pdf - for details on proper insertion procedure of chip/device into this ZIF socket.
Visually check the placement of programmed device in adapter ZIF socket. If everything looks OK, the device is ready for programming.
To take out the device from adapter, push the cover of adapter ZIF socket and remove the device.
When you finish the work with adapter, remove it from programmer ZIF socket.
If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
