Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders
  • specialized programming adapter for Cypress CY14B104NA-BA45XI, CY14B108N-BA45XI devices in BGA48 package
  • used ZIF socket may accept one or more variants of supported package, different in ball diameter, ball high and/or body thickness, see section Accepted package(s)
  • operating (mechanical) warranty of ZIF socket - 10,000 actuations
  • supported from PG4UW software version 3.84p
  • made in Slovakia
Ord. no. 70-6555
Socket ZIF BGA48, OpenTop type
Bottom 2x24 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Specialized
Subclass Cypress MCU
Availability in stock
1 pcs.
[
other 2 pcs.

This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.

within 3 working days ]
70-6555

Price: US $630.00 [read this!]

Price 2-3: US $598.50

Price 4-7: US $579.60

Price 8+ : Ask for price [?]

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

    1. fixed discount when buying 4+ adapters of particular type,

    2. individual discount for quantities 8+ according to type of adapter and        demanded quantity. To get Quotation 8+ please click here: Ask for price

We are sorry but your territory is covered by our sole distributor. Contact please the distributor for your country - listed in our web site.

View cart

Adapter manual

  • Protect the contacts of adapter connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
  • Usage of vacuum pick-up tool is expected for device handling.
  • Proceed with care! Incorrect insertion of adapter in programmer ZIF socket or device in adapter ZIF socket may lead to programmed device damage.
  • Insert adapter into programmer ZIF socket. If you are in doubts about orientation of the adapter in programmer ZIF socket, there is a rule of thumb - orientation of adapter name text is the same as orientation of the text on the top of programmer.
  • Visually check the placement of adapter in programmer ZIF socket.
  • Push the cover of adapter ZIF socket (the topmost movable part) to open the socket. Once fully actuated, drop the device into the socket from a height of 2 to 3mm above the seating plane. The correct position of the programmed device is shown on PCB of the adapter. The reference corner (e.g. position of pin A1) of the device is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned. Then release adapter ZIF socket.
  • The cover must be fully actuated (depressed) before inserting a device into the socket.
  • Do not press on device while inserting it and/or releasing the cover.
  • Visually check the placement of programmed device in adapter ZIF socket. If everything looks OK, the device is ready for programming.
  • To take out the device from adapter, push the cover of adapter ZIF socket and remove the device.
  • When you finish the work with adapter, remove it from programmer ZIF socket.
  • Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing.

Software note

  • If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
 

Accepted package(s)

BGA package Package
Design
NAMESYMBOLMINNOMMAX
ProfileA--1.2
Ball HeightA10.160.210.26
Body ThicknessA20.840.890.94
Ball Diameterb0.250.30.35
Body SizeD9.91010.1
Body SizeE5.966.1
Ball Pitche-0.75-
Ball Array DGD-8-
Ball Array EGE-6-

Usable for programmer(s):

BeeHive208S BeeHive204 BeeProg2 BeeProg2C
🍪
Back to TOP