- special adapter, assigned for STR73x family in QFP144 package
- operating (mechanical) life of ZIF socket - 10,000 actuations
- made in Slovakia
|Ord. no.|| 70-0545|
|Socket|| ZIF QFP144, OpenTop type|
|Bottom|| 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil|
|Subclass|| ST MCU|
- Insert adapter to the device programmer ZIF socket according to the picture placed nearby. If you have any doubts about orientation of adapter in device programmer ZIF socket, there is general rule valid - the orientation of the text of adapter title is the same as orientaion of the text on the top of the device programmer.
- Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of programmed device in adapter ZIF socket is show at picture near the adapter ZIF socket (commonly in above left). The reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bezel or by any combination of previous. Then release the top of adapter ZIF socket.
- Check the interconnections between device and adapter ZIF socket visually. If everything is OK, the device is ready for programming.
- Be careful - incorrect adapter insertion in the device programmer ZIF socket or device insertion in the adapter ZIF socket can cause the damage the programmed device.
- To take out the device push the top of adapter ZIF socket and pick the device out
- When you have finished working with adapter, remove it from the device programmer ZIF socket.
- Do not touch the pins of the adapter and/or adapter ZIF socket directly by hand. Dirty particles may cause errors during programming of the device.
- We recommend to use a vacuum pick up tool for device handling.
- If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.
NEPCON China 2017
25th - 27th Apr 2017
Shanghai World Expo Exhibition & Convention Center
hall no.: Hall 1
booth no.: 1N07
Del Mar Electronics Fair
3rd - 4th May 2017
Del Mar Fairgrounds, San Diego, CA, USA
booth no.: Booth #5
exhibitor: BK Precision
All exhibitions »