|
|
| Ord. no. | 73-3319 |
|---|---|
| Socket | ZIF DIL48, OpenTop type |
| Bottom | 2 connectors by 68 pins, receptacle type |
| Class | Universal |
| Subclass | DIL |
| Availability in stock |
1 pcs.
[ other 19 pcs. within 4 working days ]
This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 4 working days. |
Price: US $198.00 [read this!]
Price 2-3: US $188.10
Price 4-7: US $182.20
Price 8+ : Ask for price [?]
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:
1. fixed discount when buying 4+ adapters of particular type,
2. individual discount for quantities 8+ according to type of adapter and demanded quantity. To get Quotation 8+ please click here:
Ask for price
We are sorry but your territory is covered by our sole distributor. Contact please the distributor for your country - listed in our web site.
Module manual
- Programmer don"t need to be switched off and SW can be running during inserting/removing programming module
- Protect the contacts of module connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
- Proceed with care! Incorrect insertion of device in module ZIF socket may lead to programmed device damage.
- Unscrew knurled thumb screw. Insert programming module into Programming Module Interface connectors, until it clicks. Due to connectors shape, only one orientation and position of programming module in Programming Module Interface connectors is possible. Screw knurled thumb screw to fix programming module on programmer.
- Open the module ZIF socket with lever (lever is at upper position). Insert the device into it. Correct position of programmed device in module ZIF socket is indicated by picture near (usually on left above) the module ZIF socket. On that picture, reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned. Then close module ZIF socket with lever (lever is at lower position).
- Visually check the placement of programmed device in module ZIF socket. If everything looks OK, the device is ready for programming.
- To take out the device from adapter, open the module ZIF socket by lever (lever is at upper position) and remove device.
- When you finish the work with module, unscrew knurled thumb screw and remove the module from Programming Module Interface connectors.
- Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing
Software note
- If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
Accepted package(s)
| DIL24 - DIL48 |
 |
 |
| DIL8 - DIL28 |
 |
 |
