Universal | Production | Device | Programmers | Adapters | Elnec
show-menu
0 items | view cart Elnec online orders
  • special adapter, assigned for ATMEL ATSAM3U4CA-CU devices in LFBGA100 package
  • operating (mechanical) warranty of ZIF socket - 10,000 actuations
  • made in Slovakia
Ord. no. 70-2981
Socket ZIF BGA100, OpenTop type
Bottom 2x24 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Specialized
Subclass ARM
Availability in stock
0 pcs.

We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.

[
other 18 pcs.

This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.

within 3 working days ]
70-2981

Price: US $495.00 [read this!]

Price 2-3: US $470.30

Price 4-7: US $455.40

Price 8+ : Ask for price [?]

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

    1. fixed discount when buying 4+ adapters of particular type,

    2. individual discount for quantities 8+ according to type of adapter and        demanded quantity. To get Quotation 8+ please click here: Ask for price

We are sorry but your territory is covered by our sole distributor. Contact please the distributor for your country - listed in our web site.

View cart

Adapter manual

  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. On this picture reference corner (e.g. position of pin 1) of device is indicated by dot, by number 1, by bevelled corner or by any combination of them. Then release adapter ZIF socket.
  • The cover must be fully actuated (depressed) before inserting a device into the socket.
  • Do not press on device while inserting it and/or releasing the cover.
  • Check this brochure for details on proper insertion procedure of chip/device into this ZIF socket.
  • Check brochure - https://www.elnec.com/sw/3m_tweezer_handling.pdf - for details on proper insertion procedure of chip/device into this ZIF socket.
  • Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
  • To take out the device push the top of adapter ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.

Software note

  • If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.
 

Accepted package(s)

BGA package Package
Design
NAMESYMBOLMINNOMMAX
ProfileA--1.1
Ball HeightA10.250.30.35
Body ThicknessA20.670.710.75
Ball Diameterb0.350.40.45
Body SizeD8.9599.05
Body SizeE8.9599.05
Ball Pitche-0.8-
Ball Array DGD-10-
Ball Array EGE-10-

Usable for programmer(s):

BeeHive208S BeeHive204 BeeProg2 BeeProg2C
🍪
Back to TOP