BeeProg2

 
For the proper functioning of this website we recommend to turn on JavaScript.
 

DIL48/SDIP64 ZIF HD63-1
(Ord. no. 70-3498)

See: Adapter manual | Accepted package(s) | Usable for programmer(s) | List of supported devices
  • 70-3498
    Move the cursor over the picture for additional view.

    Price: US $295.00 [read this!][read this!])
    Price 4-7: US $271.40
    Price 8+ : Ask for price [?]

      View cart

  • specialized adapter for HD637B01Y0 devices in SDIP64 package
  • operation (mechanical) life of ZIF socket - 20.000 actuations
  • supported from PG4UW software version 3.16z
  • made in Slovakia
Ord. no. 70-3498
Socket ZIF SDIP64
Bottom 2x24 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Specialized
Subclass Mitsubishi/Renesas MCU
Availability in stock 1 pcs. [other 13 pcs. This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days. within 3 days]
Adapter manual
  • Protect the contacts of adapters's connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
  • Usage of vacuum pick-up tool is expected for device handling.
  • Proceed with care! Incorrect insertion of adapter in programmer's ZIF socket or device in adapter's ZIF socket may lead to programmed device damage.

  • Insert adapter into programmer's ZIF socket. If you are in doubts about orientation of the adapter in programmer's ZIF socket, there is a rule of thumb - orientation of adapter's name text is the same as orientation of the text on the top of programmer.
  • Visually check the placement of adapter in programmer's ZIF socket.
  • Open the adapter's ZIF socket with lever (lever is at upper position). Insert the device into it. Correct position of programmed device in adapter's ZIF socket is indicated by picture near (usually on left above) the adapter's ZIF socket. On that picture, reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned. Then close adapter's ZIF socket with lever (lever is at lower position).
  • Visually check the placement of programmed device in adapter's ZIF socket. If everything looks OK, the device is ready for programming.
  • To take out the device from adapter, open the adapter's ZIF socket by lever (lever is at upper position) and remove device.
  • When you finish the work with adapter, remove it from programmer's ZIF socket.

  • Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing.

Software note
  • If software version, you're using currently, doesn't contain support for this programming adapter, please download the latest version of software - Regular or OnDemand - from our web site.
 
Accepted package(s)
SDIP64 Package
Design

Usable for programmer(s):
BeeHive208S BeeHive204 BeeProg2 BeeProg2C BeeProg+ BeeHive8S BeeHive4+



This number indicates quantity of items that could be produced from components in stock. Reasonable quantity of this product can be available within 3 working days.
We are sorry, that the item is not in stock at the moment. Please ask for availability, click here.