Programmers | Adapters | Elnec | Universal | Production | Device
0 items | view cart Elnec online orders
  • universal adapter, assigned for 8pin devices devices in 8BALL WLCSP package
  • operating (mechanical) warranty of ZIF socket - 500 000 actuations
  • made in Slovakia
Ord. no. 70-2862
Socket ZIF BGA8, Clamshell type
Bottom 2x20 pins, square, 0.6x0.6mm, rows spacing 600mil
Class Universal
Subclass DIL/BGA
Availability in stock
1 pcs.
70-2862 Move the cursor over the picture for additional view.

Price: US $854.00 [read this!]

Price 2-3: US $811.30

Price 4-7: US $785.70

Price 8+ : Ask for price [?]

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

    1. fixed discount when buying 4+ adapters of particular type,

    2. individual discount for quantities 8+ according to type of adapter and        demanded quantity. To get Quotation 8+ please click here: Ask for price

We are sorry but your territory is covered by our sole distributor. Contact please the distributor for your country - listed in our web site.

View cart

Adapter manual

  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Open the adapter ClamShell ZIF socket. Insert the device inside (place device on contacts). The right position of the programmed device in adapter BGA ZIF socket is shown on body of the open BGA ZIF socket. The reference corner (position of pin A1) of the device is indicated by dot.
  • Visually check interconnection between device and adapter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ClamShell ZIF socket can damage the programmed device.
  • To take out the device, open adapter ClamShell ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.

Software note

  • If software version, you're using currently, doesn't contain support for this programming module, please download the latest version of software - Regular or OnDemand - from our web site.

Accepted package(s)

BGA package Package
Ball HeightA1-0.23-
Body ThicknessA2-0.35-
Ball Diameterb-0.322-
Body SizeD-3.573.685
Body SizeE-2.052.165
Ball Pitche-0.6-
Ball Array DGD-5-
Ball Array EGE-3-

Usable for programmer(s):

BeeHive208S BeeHive204 BeeProg2 BeeProg2C

Note: This programming adapter / module may not support all devices in the package(s) mentioned above on your programmer. Please, verify situation for particular device(s) you are going to work with using actual Device list of your programmer.

Back to TOP